Within the elastic limit, stress of brass is `3.5xx10^(10)N//m^(2)`. Find the maximum load that can be applied to a brass wire of 0.75 mm diameter without exceeding the elastic limit.

The elastic limit of stees is 8xx10^8Nm^-2 andits Young modulus 2x10^11Nm^-2 . Find the maximum eleongatin of a half metre steel wire that can be given without exceeding the elastic limit.

The elastic limit of steel is 8xx10^8Nm^-2 and its Young modulus 2xx10^11Nm^-2 . Find the maximum elongation of a half meter steel wire that can be given without exceeding the elastic limit.

The elastic limit of steel is 8xx10^8Nm^-2 and its Young modulus 2xx10^11Nm^-2 . Find the maximum elongation of a half meter steel wire that can be given without exceeding the elastic limit.

The stress for elastic limit of a material is 3.5times10^(8)N/m^(2) .The minimum diameter of a rod made of this material which can support 500N load without exceeding elastic limit will be

The stress for elastic limit of a material is 3.5 times 10^8 Nm^-2 . The minimum diameter of a rod made of this material which can support 500 N load without exceeding elastic limit will be :

If the elastic limit of copper is 1.5xx10^(8) N//m^(2) ,determine the minimum diameter a copper wire can have under a load of 10.0 kg find , if its elastic limit is not to be exceeded.

If the elastic limit of copper is 1.5xx10^(8) N//m^(2) ,determine the minimum diameter a copper wire can have under a load of 10.0 kg force , if its elastic limit is not to be exceeded.

The elastic limit of brass is 379MPa . What should be the minimum diameter of a brass rod if it is to support a 400 N load without exceeding its elastic limit?

The elastic limit of brass is 379 MPa . What should be the minimum diameter of a brass rod if it is to support a 400 N load without exceeding its elastic limit ?

A sonometer wire has a length of 0.75 m and density of the material of the wire is 10^(4) kg//m^(3) . If the wire can bear a stress of 7.5 xx 10^(8) N//m^(2) without exceeding the elastic limit, what fundamental frequency can be produced in the wire ?