Home
Class 11
PHYSICS
Two bars are untressed and have lengths ...

Two bars are untressed and have lengths of `25cm` and `30cm` at `20^(@)C` as shown in Figure. Bar`(1)` is of aluminium and bar `(2)` is of steel. The croos-sectional area of bars are `20cm^(2)` for aluminium and `10cm^(2)` for steel. Assuming that the top and bottom supports are rigid, stress in `(N)/(mm^(2))` when the temperature is `70^(0)C`. (Nearly)
(`Y_(a)=0.70xx10^(5)N//mm^(2)Y_(s)=2.1xx10^(5)N//mm^(2).alpha_(a)=24xx10^(-6//0)C` and `alpha_(s)=12.xx10^(-6//0)C`)

Promotional Banner

Similar Questions

Explore conceptually related problems

A wire of cross sectional area 3 mm^(2) is just stretched between two fixed points at a temperature of 20^(@)C . Then the tension in the wire when the temperature falls to 10^(@)C is, (alpha =1.2 xx 10^(-5) //""^(@)C, Y=2xx10^(11) N//m^(2))

A steel rod of length 6.0 m and diameter 20 mm is fixed between two rigid supports. Determine the stress in the rod, when the temperature increased by 80^(@)C if ends do not yield. Take Y=2.0xx10^(5)kg//cm^(2) and alpha=12xx10^(-6)"per ".^(@)C .

A brass of length 2 m and cross-sectional area 2.0 cm^(2) is attached end to end to a steel rod of length and cross-sectional area 1.0 cm^(2) . The compound rod is subjected to equal and oppsite pulls of magnitude 5 xx 10^(4) N at its ends. If the elongations of the two rods are equal, the length of the steel rod (L) is { Y_(Brass) = 1.0 xx 10^(11) N//m^(2) and Y_(steel) = 2.0 xx 10^(11) N//m^(2)

A brass of length 2 m and cross-sectional area 2.0 cm^(2) is attached end to end to a steel rod of length and cross-sectional area 1.0 cm^(2) . The compound rod is subjected to equal and oppsite pulls of magnitude 5 xx 10^(4) N at its ends. If the elongations of the two rods are equal, the length of the steel rod (L) is { Y_(Brass) = 1.0 xx 10^(11) N//m^(2) and Y_(steel) = 2.0 xx 10^(11) N//m^(2)

A wire of cross-sectional area 3 mm^(2) is first stretched between two fixed points at a temperature of 20^(@)C . Determine the tension when the temperature falls to 10^(@)C Coefficient of linear expansion alpha=10^(-5).^(@)C^(-1) and Y =2 xx10^(11) N//m^(2)

A steel rod of length 25cm has a cross-sectional area of 0.8cm^(2) . The force required to stretch this rod by the same amount as the expansion produced by heating it through 10^(@)C is (alpha_(steel)=10^(-5)//^(@)C and Y_(steel)=2xx10^(10)N//m^(2))