Home
Class 11
PHYSICS
Figure shows an aluminium rod joined to ...

Figure shows an aluminium rod joined to a copper rod. Each of the rods has a length of 20cm and area of ccross section `0.20cm^(2)` . The junction is maintained at a constant temperature `40^(@)C` and the two ends are maintained at 80^(@)C` . Calculate the amount of heat taken out from the cold junction in one minute after the steady state is reached. The conductivities are `K_(Al)=200Wm^(-1)`^(@)C^(-1)` . and `K_(Cu)=400Wm^(-1)`^(@)C^(-1)` .

Promotional Banner

Similar Questions

Explore conceptually related problems

Figure shows a steel rod joined to a brass rod. Each of the rods has length of 31 cm and area of cross-section 0.20 cm^(2) . The junction is maintained at a constant temperature 50^(@)C and the two ends are maintained at 100^(@)C . The amount of heat taken out from the cold junction in 10 minutes after the steady state is reached in n xx 10^(2)J . Find 'n' the thermal conductivities are K_(steel) = 46 W//m-^(@)C and K_(brass) = 109 W//m-^(@)C .

Figure shows a steel rod joined to a brass eod. Each of the rods has length of 31 cm and area of cross-section 0.20 cm^(2) . The junction is maintained at a constant temperature 50^(@)C and the two ends are maintained at 100^(@)C . The amount of heat taken out from the cold junction in 10 minutes after the steady state is reached in n xx 10^(2)J . Find 'n' the thermal conductivities are K_(steel) = 46 W//m-^(@)C and K_(brass) = 109 W//m-^(@)C .

An aluminium rod and a copper rod of equal length 1.0 m and cross-sectional area. 1cm^(2) are welded together as shown in figure. One end is kept at a temperature of 20^(@)C and the other at 60^(@)C Calculate the amount of heat taken out per second from the hot end. thermal conuctivity of aluminium =200Wm^(-1) ^(@)C^(-1) and of copper =390Wm^(-1) ^(@)C^(-1) .

An aluminium rod and a copper rod of equal length 1.0 m and cross-sectional area. 1cm^(2) are welded together as shown in figure. One end is kept at a temperature of 20^(@)C and the other at 60^(@)C Calculate the amount of heat taken out per second from the hot end. thermal conductivity of aluminium =200Wm^(-1)C^(-1) and of copper =390Wm^(-1)C^(-1) .

An aluminium rod and a copper rod of equal length 1.0 m and cross-sectional area. 1cm^(2) are welded together as shown in figure. One end is kept at a temperature of 20^(@)C and the other at 60^(@)C Calculate the amount of heat taken out per second from the hot end. thermal conductivity of aluminium =200Wm^(-1)C^(-1) and of copper =390Wm^(-1)C^(-1) .

Two rods of material, x and two of y are connected as shown in the figure. All the rods are indentical in length and cross-sectional area. If the end A is maintained at 80^(@)C and the end D is maintained at 10^(@)C , calculate the temperature of the junctions B and C in the steady state. Thermal conductivity of x is double that of y .

The left end of a copper rod (length= 20cm , Area of cross section= 0.2cm^(2) ) is maintained at 20^(@)C and the right end is maintained at 80^(@)C . Neglecting any loss of heat through radiation, find (a) the temperature at a point 11cm from the left end and (b) the heat current through the rod. thermal conductivity of copper =385Wm^(-1)C^(-1) .

The left end of a copper rod (length= 20cm , Area of cross section= 0.2cm^(2) ) is maintained at 20^(@)C and the right end is maintained at 80^(@)C . Neglecting any loss of heat through radiation, find (a) the temperature at a point 11cm from the left end and (b) the heat current through the rod. thermal conductivity of copper =385Wm^(-1)C^(-1) .

The lleft end of a copper rod (length=20cm. Area of cross section=0.02cm^(2) is maintained at 20^(@)C and the right end is maintained at 80^(@)C . Neglecting any lkkoss of heat through radiation, find (a) the temperature at a point 11cm from the left end and (b) the heat current through the rod. thermal conductivity of copper =385Wm=^(-1) ^(@)C^(-1) .

One end of a metal rod of length 1.0 m and area of cross section 100 cm^(2) is maintained at . 100^(@)C . If the other end of the rod is maintained at 0^(@)C , the quantity of heat transmitted through the rod per minute is (Coefficient of thermal conductivity of material of rod = 100 W//m-K )