A diode has potential drop of 0.5 volts in forward bias. The maximumcurrent that can be flow through diode is 10mA.Then find the resistance connected in series with diode so that set up can be connected to a battery of 1.5 volts:

The diode used at a constant potential drop of 0.5 V at all currents and maximum power rating of 100 mW. What resistance must be connected in series diode, so that current in circuit is maximum?

The diode used at a constant potential drop of 0.5 V at all currents and maximum power rating of 100 mW. What resistance must be connected in series diode, so that current in circuit is maximum?

When a diode is forward biased, it has a voltage drop of 0.5 V. The safe limit of current through the diode is 10 mA. If a battery of emf 1.5 V is used in the circuit, the value of minimum resistance to be connected in series with the diode so that the current does not exceed the safe limit is :

When a diode is forward biased, it has a voltage drop of 0.5 V. The safe limit of current through the diode is 10 mA. If a battery of emf 1.5 V is used in the circuit, the value of minimum resistance to be connected in series with the diode so that the current does not exceed the safe limit is :

A P-N junction diode can withstand currents up to 10 mA . Under forward bias, The diode has a potential drop of 0.5 V across it which is assumed to be independent of current. The maximum voltage of the battery used to forward bias the diode when a resistance of 200 Omega is connected in series with it is

A P-N junction diode can withstand currents up to 10 mA . Under forward bias, The diode has a potential drop of 0.5 V across it which is assumed to be independent of current. The maximum voltage of the battery used to forward bias the diode when a resistance of 200 Omega is connected in series with it is

A P-N junction diode can withstand currents up to 10 mA . Under forward bias, The diode has a potential drop of 0.5 V across it which is assumed to be independent of current. The maximum voltage of the battery used to forward bias the diode when a resistance of 200 Omega is connected in series with it is

The voltage drop across a forward biased diode is 0.7 volt. In the following circuit, the voltages across the 10 ohm resistance in series with the diode and 20 ohm resistance are :

The barrier potential in a p-n junction diode is 0.3 volts . The current required is 6 mA. If a resistance of 200 Omega is connected in series with the junction diode then the e.m.f. of the cell required for use in the circuit is

A diode made of silicon has a barrier potential of 0.7 V and a current of 20 mA passes through the diode when a battery of emf 3 V and a resistor is connected to it. The wattage of the resistor and diode are