Home
Class 11
PHYSICS
Two wires of diameter 0.25 cm, one made ...

Two wires of diameter `0.25 cm`, one made of steel and other made of brass, are loaded as shown in the figure. The unloaded length of the steel wire is `1.5 m` and that of brass is `1.0 m`. Young's modulus of steel is `2.0 xx 10^(11)`Pa and that of brass is `1.0 xx 10^(11)` Pa. Compute the ratio of elongations of steel and brass wires. `(/_\l_("steel"))/(/_\l_("brass"))=?`

Promotional Banner

Similar Questions

Explore conceptually related problems

Two wires of diameter 0.25 cm, one made of steel and the other made of brass are loaded as shown in figure. The unloaded length of steel wire is 1.5 m and that of brass wire is 1.0 m. Compute the elongations of the steel and the brass wires.

Two wires of diameter 0.25 cm, one made of steel and the other made of brass are loaded as shown in fig. The unloaded length of steel wire is 1.5 m and that of brass wire is 1.0m. Compute the elongations of the steel and the brass wires.

Two wires of diameter 0.25 cm, one made of steel and the other made of brass are loaded as shown in Fig. 9.13. The unloaded length of steel wire is 1.5 m and that of brass wire is 1.0 m. Compute the elongations of the steel and the brass wires.

Two wires of diameter 0.25 cm, one made of steel and the other made of brass are loaded as shown in Fig. 9.13. The unloaded length of steel wire is 1.5 m and that of brass wire is 1.0 m. Compute the elongations of the steel and the brass wires:

Two wires of diameter 0.25 cm, one made of steel and the other made of brass are loaded as shown in Fig. 9.13. The unloaded length of steel wire is 1.5 m and that of brass wire is 1.0 m. Compute the elongations of the steel and the brass wires.

Two wires of diameter 0.25 cm, one made of steel and the other made of brass are loaded as shown in figure. The unloaded length of steel wire is 1.5 m and that of brass wire is 1.0 m. Compute the elongations of the steel and the brass wires .Young's modulus of steel is 2.0 xx 10^(11) Pa and that of brass is 9.1 xx 10^(11) Pa.

Compute the elongation of the steel wire and brass wire in the given Given unloaded length of steel wire = 2.0 m, unloaded length of brass wire = 1.0m. Area of cross-section of each wire = 0.049 cm^2. Y_(steel) = 2xx10^(11)Pa and Y_(Brass) = 0.90 xx 10^(11)P_a , g = 9.8 ms^(-2)

A steel wire is 4.0 m long and 2 mm in diameter. Young’s modulus of steel is 1.96 xx 10^(11) N//m^(2) . If a mass of 20 kg is suspended from it the elongation produced will be-

A composite wire of uniform diameter 3.0 mm consisting of a copper wire of length 2.2m and a steel wire of length 1.6m stretches under a load by 0.7 mm. Calculate the load, given that the Young's modulus for copper is 1.1 xx 10^(11) Pa and for steel is 2.0 xx 10^(11)Pa .