A brass rod is to support a load of 400 N. If its elastic limit is `4.0 xx 10^(8) N//m^(2)` its minimum diameter must be -

The Young's modulus of a material is 2xx10^(11)N//m^(2) and its elastic limit is 1xx10^(8) N//m^(2). For a wire of 1 m length of this material, the maximum elongation achievable is

The young's modulus of a material is 2xx10 ^(11) N//m^2 and its elastic limit is 1xx10 ^(8) N//m ^2 for a wire of 1m length of this material , the maximum elongation achievable is

The Young's modulus of a material is 2xx10^(11)N//m^(2) and its elastic limit is 1xx10^(8) N//m^(2). For a wire of 1 m length of this material, the maximum elongation achievable is

The stress for elastic limit of a material is 3.5times10^(8)N/m^(2) .The minimum diameter of a rod made of this material which can support 500N load without exceeding elastic limit will be

The diameter of a brass rod is 4 mm and Young's modulus of brass is 9 xx 10 ^(9) Nm ^(-2), What will be the force required to stretch by 0.1% of its length ?

A steel wire can support a maximum load of W before reaching its elastic limit. How much load can another wire, made out of identical steel, but with a radius one half the radius of the first wire, support before reaching its elastic limit?

A steel wire can support a maximum load of W before reaching its elastic limit. How much load can another wire, made out of identical steel, but with a radius one half the radius of the first wire, support before reaching its elastic limit?

[" The stress for elastic limit of a "],[" material is "3.5times10^(8)N/m^(2)" .The "],[" minimum diameter of a rod made of "],[" this material which can support "500N],[" load without exceeding elastic limit "],[" will be "]

The stress for elastic limit of a material is 3.5 times 10^8 Nm^-2 . The minimum diameter of a rod made of this material which can support 500 N load without exceeding elastic limit will be :