The cross-section of two piston in hydraulic press are `2cm^(2) "and" 150 cm^(2)` respectivley . Calculate the minimum force required to support a weight of `2000"kg"` wt on the broader face of the press.

The area of cross section of two cylinders of a Bramah press are 10cm^(2)and50cm^(2) , respectively. In order to move up a weight of 100 placed on the bigger piston. what force should be applied on the smaller piston of smaller area ?

An object of weight 500 kg_(wt) is lifted by using a hydraulic press. The radii of the cross sections of the pump piston and press piston are 10 cm and 20 cm, respectively. Calculate the effort required to lift the object. Calculate the displacement of the load if the effort is moved through a distance of 20 cm.

The area of cross-section of the two vertical arms of a hydraulic press are 1 cm ^(2) and 10 cm^(2) respectively. A force of 10N applied. As shown in the figure, to a tight fitting light piston in the thinner arm balances a force F applied to the corresponding piston in the thicker arm. Assuming that the levels of water in both the arms are the same, we can conclude:-

The area of cross-section of the two vertical arms of a hydraulic press are 1 cm ^(2) and 10 cm^(2) respectively. A force of 10N applied. As shown in the figure, to a tight fitting light piston in the thinner arm balances a force F applied to the corresponding piston in the thicker arm. Assuming that the levels of water in both the arms are the same, we can conclude:-

The area of cross-section of the two vertical arms of a hydraulic press are 1 cm ^(2) and 10 cm^(2) respectively. A force of 10N applied. As shown in the figure, to a tight fitting light piston in the thinner arm balances a force F applied to the corresponding piston in the thicker arm. Assuming that the levels of water in both the arms are the same, we can conclude:-

The radii of two pistons in a hydraulic press are 5cm and 15cm respectively. A force F_1 exerted in the small piston can lift a car of mass 1350 kg placed on the larger piston. What is the value of F_1 ? What is the pressure necessary to accomplish the task?

The area of cross sectioin of the two arms of a hydraulic press is 1cm^(2) and 20 cm^(2) respectively. A force of 10 N is applied on the water in the thinner arm. What force should be applid on the water in the thicker arms so that water may remain in equilibrium?

The area of cross sectioin of the two arms of a hydraulic press is 1cm^(2) and 20 cm^(2) respectively. A force of 10 N is applied on the water in the thinner arm. What force should be applid on the water in the thicker arms so that water may remain in equilibrium?

The area of cross section of press plunger of a hydraulic press is 4 m^2 . It is required to overcome a resistiveload of 400 kg on it. Calculate the force required on the pump plunger if the area of cross section of the pump plunger is 0.01 m^2 .