Pitch of a screw gauge is 0.5 mm and its least count is .01 mm, Calculate no. of divisons on its circular scale.

The pitch of a screw gauge is 0.5 mm and the number of division on the circular scale is 100. When a glass plate is held between the studs of the screw gauge , the main scale reads 1.5 mm and the 69th division of the circular scale coincides with the index line of the main scale . What is the thickness of the glass plate ?

the least count of the main scale of a screw gauge is 1 mm. the minimum number of divisions on its circular scale required to measure 5 mu m diameter of a wire is :

the least count of the main scale of a screw gauge is 1 mm. the minimum number of divisions on its circular scale required to measure 5 mu m diameter of a wire is :

The pitch of a screw gauge is 0.5mm and there are 50 divisions on its circular scale and one main scale division =0.5 mm. Before starting the measurement it is found that when jaws of the screw gauge are brought in contact, the zero of the circular scale lies 4 division above the reference line. when a metallic wire is placed between the jaws, five main scale divisions are clearly visible and 18^(th) division on the circular scale coincides with the reference line. the diameter of the wire is

Pitch of the screw gauge is 0.5mm . Its head scale contains 50 divisions. The least count of it is

A screw gauge has least count of 0.01 mm and there are 50 divisions in its circular scale: The pitch of the screw gauge is:

A screw gauge has least count of 0.01 mm and there are 50 divisions in its circular scale: The pitch of the screw gauge is:

The pitch of a screw gauge is 1mm and its cap is divided into 100 divisions. When this screw gauge is used to measure the diameter of a wire, then main scale reading is 2 mm and 58^(th) division of circular scale coincides with the main scale. There is no zero error in the screw gage. Then the diameter of the wire is

The pitch of a screw gauge is 1mm and its cap is divided into 100 divisions. When this screw gauge is used to measure the diameter of a wire, then main scale reading is 2 mm and 58^(th) division of circular scale coincides with the main scale. There is no zero error in the screw gage. Then the diameter of the wire is