Home
Class 11
PHYSICS
In a simple hydraulic press, the cross s...

In a simple hydraulic press, the cross sectional area of the two cylinders is `5xx10^(-1)m^(2)` and `10^(-2)m^(2)` respectively. A force of `20 N` is applied at the small plunger.
a. What is the pressure produced in the cylinders?
b. What is the thrust exerted on the large plunger?
c. How much work is done by the operator, if the smaller plunger moves down `0.1m`?

Promotional Banner

Similar Questions

Explore conceptually related problems

In a hydraulic press used for compressing cotton the area of the piston is 0.1 m^(2) and the force exerted along the piston rod is 200 N . If the area of the larger cylinder is 0.8 m^(2) , find the pressure produced in the cylinder and the total crushing force exerted on the bale of cotton.

A hydraulic system consists of one cylinder that has a cross sectional area of 4m^2 , connected to another cylinder that has a cross-sectional area of 12m^2 . A force of 9 N is applied to the smaller cylinder. What force acts at the larger cylinder?

The area of cross section of two cylinders of a Bramah press are 10cm^(2)and50cm^(2) , respectively. In order to move up a weight of 100 placed on the bigger piston. what force should be applied on the smaller piston of smaller area ?

In a hydraulic press used for compressing wool, the area of the pistion is 0.1 m^2 and the force exerted along the piston rod is 200 N. find the pressure and If the area of larger cylinder 0.8 m and the total crushing force exerted on a bale of wool.

A wire of length 1m and area of cross section 4 xx 10^(-8) m^(2) increases in length by 0.2 cm when a force of 16 N is applied. Value of Y for the material of the wire will be

A cylinder with a diameter of 0.240 m is placed between the plates of a hydraulic press as illustrated in the figure. A force equal to 4.45xx10^(5) N is applied to the cylinder. What is the pressure on the end of the cylinder due to the applied force ?

In an arrangement similar to a hydraulic lift, the diameters of smaller and larger pistons are 1.0 cm and 3.0 cm respectively. What is the force exerted on the larger piston when a force of 10 N is applied to the smaller piston?

In an arrangement similar to a hydraulic lift, the diameters of smaller and larger pistons are 1.0 cm and 3.0 cm respectively. What is the force exerted on the larger piston when a force of 10 N is applied to the smaller piston?

The pressure exerted on the smaller and the larger piston of a hydraulic machine is 15 Pa Calculate the force exerted by it on the larger piston, if the area of cross section of the larger piston is 4 m^2 .

Water is flowing with a speed of 2m//s in a horizontal pipe with cross-sectional area decreasing from 2xx10^(-2) m^(2) to 0.01 m^(2) at pressure 4xx10^(4) pascal. What will be the pressure at smaller cross-section?