The jaws of a vernier callipers touch the inner wall of calorimeter without any undue pressure. The position of zero of vernier scale on the main scale reads 3.48. The `6^(th)` of vernier scale division is coinciding with any main scale division. Vernier constant of callipers is 0.01 cm. Find actual internal diameter of calorimeter, when it is observed that the vernier scale has a zero error of -0.03cm.

The jaws of a vernier callipers touch the inner wall of calorimeter without any undue pressure. The position of zero of vernier scale on the main scale reads 3.48 cm. The 6^(th) of vernier scale division is coinciding with any main scale division. Vernier constant of callipers is 0.01 cm. Find actual internal diameter of calorimeter, when it is observed that the vernier scale has a zero error of -0.03cm.

The vernier constant of a vernier callipers is 0.1 mm and it has a positive zero error of 0.04 cm . While measuring diameter of a rod, the main scale reading is 1.2 cm and 5th vernier division is coinciding with any scale division. The correct diameter of the rod is

Smallest division on the main scale of given Vernier calipers is 0.5 mm. Vernier scale has 25 divisions and these coincide with 24 main scale divisions. The least count of Vernier callipers is

Smallest division on the main scale of given Vernier calipers is 0.5 mm. Vernier scale has 25 divisions and these coincide with 24 main scale divisions. The least count of Vernier callipers is

The vernier constant of a vernier calipers is 0.001 cm . If 49 main scale divisions coincide with 50 vernier scale divisions, then the value of 1 main scale divisions is .

The vernier constant of a vernier callipers is 0.001 cm . If 49 main scale divisions coincide with 50 vernier scale devisions, then the value of 1 main scale divisions is .

The vernier constant of a vernier callipers is 0.001 cm . If 49 main scale divisions coincide with 50 vernier scale devisions, then the value of 1 main scale divisions is .

When the two jaws of a vernier callipers are in touch, zero of vernier scale lies to the right of zero of main scale and coinciding with vernier division 3 . If vernier constant is 0.1 mm , the zero correction is

If vernier calliper has positive error of 0.2mm. If zero of vernier scale lies between 8.5cm and 8.6cm. If 6th division of vernier scale coincides with main scale. Then reading will be (LC = 0.1MM)