A steel teape is placed around the earth at the equator. When the temperature is `0^(0)C` neglecting the expansion of the earth, the neglecting between the tape and the ground if the temperature of the tape rises to `30^(0)C`, is nearly `(alpha_(steel) = 11 xx 10^(-6) // K)`

A steel tape placed around the earth at the equator when the temperature is 10^(@)C . What will be the clearance between the tape and the ground (assumed to be uniform) if the temperature of the tape rises to 40^(@)C ? Neglect expansion of the earth. Radius of earth at equator is 6400 km & alpha_(steel)= 1.2 xx 10^(-5)K^(-1)

A steel tape placed around the earth at the equator when the temperature is 10^(@)C . What will be the clearance between the tape and the ground (assumed to be uniform) if the temperature of the tape rises to 40^(@)C ? Neglect expansion of the earth. Radius of earth at equator is 6400 km & alpha_(steel)= 1.2 xx 10^(-5)K^(-1)

A steel tape placed around the earth at the equator when the temperature is 10^(@)C . What will be the clearance between the tape and the ground (assumed to be uniform) if the temperature of the tape rises to 40^(@)C ? Neglect expansion of the earth. Radius of earth at equator is 6400 km & alpha_(steel)= 1.2 xx 10^(-5)K^(-1)

A heavy brass bar has projections at its ends as shown in the figure. Two find steel wires, fastened between the projections, are just taut (zero tension) when the whole systeam is at 0^(0)C . What is the tensile stress in the steel wires when the temperature of the systeam is raised to 300^(0)C ? Given that alpha_("brass") = 20 xx 10^(-6 ^(@))C^(-1) alpha_("steel") = 12 xx 10^(-6@)C^(-1) Y_("steel") = 2 xx 10^(11) Nm^(-2)

A steel tape is callibrated at 20^@ C . On a cold day when the temperature is -15^@ C , what will be the percentage error in the tape ?

A steel tape is callibrated at 20^@ C . On a cold day when the temperature is -15^@ C , what will be the percentage error in the tape ?

A steel tape Im long is correctly calibrated for a temperature of 27.0 ^(@) C . The length of a steel rod measured by this tape is found to be 63.0 cm on a hot day when the temperature is 45.0^(@) C .What is the actual length of the steel rod on that day? What is the length of the same steel rod on a day when the temperature is 27.0^(@) C ? Coefficient of linear expansion of steel = 1.20 xx 10^(-5) K^(-1) .

A steel tape Im long is correctly calibrated for a temperature of 27.0 ^(@) C . The length of a steel rod measured by this tape is found to be 63.0 cm on a hot day when the temperature is 45.0^(@) C .What is the actual length of the steel rod on that day? What is the length of the same steel rod on a day when the temperature is 27.0^(@) C ? Coefficient of linear expansion of steel = 1.20 xx 10^(-5) K^(-1) .