A screw gauge has least count of 0.01 mm and there are 50 divisions in its circular scale:
The pitch of the screw gauge is:

The pitch of a screw gauge is 1 mm and there are 100 divisions on circular scale. When the two studs of the screw gauge are touching each other, the 32^(nd) division of the circulasr scale coincides with the reference line / base line / index line on the pitch scale. When a glass plate is placed in between the studs firmly, the pitch scale reads 4 divisions and the circular scale reads 16 divisions Least count of the apparatus is

The pitch of a screw gauge is 1 mm and there are 100 divisions on circular scale. When the two studs of the screw gauge are touching each other, the 32^(nd) division of the circulasr scale coincides with the reference line / base line / index line on the pitch scale. When a glass plate is placed in between the studs firmly, the pitch scale reads 4 divisions and the circular scale reads 16 divisions Least count of the apparatus is

A screw gauge advances by 3mm in 6 rotations. There are 50 divisions on circular scale. Find least count of screw gauge

A screw gauge advances by 3mm in 6 rotations. There are 50 divisions on circular scale. Find least count of screw gauge

A screw gauge advances by 3mm in 6 rotations. There are 50 divisions on circular scale. Find least count of screw gauge

A screw gauge has a pitch of 0.5 mm, and has 50 divisions on its circular scale. Its linear and circular scale readings are respectively 2 mm and 25 when the diameter of a sphere is measured by the gauge. The result of this measurement is

A vernier calipers and a screw gauge have the same least count and zero error with the difference that the vernier calipers has positive zero error and the screw gauge has negative zero error. The number of circular scale divisions on the screw gauge is twice the number of vernier scale divisions on the vernier calipers and the pitch of the screw gauge is 1mm. If the vernier coinciding division and the circular are 3 and 97, respectively then find the number of vernier scale divisions on the vernier calipers.

A screw gauge of pitch 1.0 mm has 200 divisions on its circular scale. Find out its least count.