Home
Class 12
PHYSICS
A wire of length 1 m and radius 0.1mm ha...

A wire of length 1 m and radius 0.1mm has a resistance of `100(Omega)`.Find the resistivity of the material .

Text Solution

AI Generated Solution

To find the resistivity of the material of the wire, we can use the formula for resistivity: \[ \rho = R \cdot \frac{A}{L} \] where: - \(\rho\) is the resistivity, ...
Promotional Banner

Topper's Solved these Questions

  • ELECTRIC CURRENT IN CONDUCTORS

    HC VERMA ENGLISH|Exercise questions for short answer|17 Videos

  • ELECTRIC CURRENT IN CONDUCTORS

    HC VERMA ENGLISH|Exercise objective 2|9 Videos

  • DISPERSION AND SPECTRA

    HC VERMA ENGLISH|Exercise Question for short Answer|6 Videos

  • ELECTRIC CURRENT THROUGH GASES

    HC VERMA ENGLISH|Exercise Short answer|6 Videos

Similar Questions

Explore conceptually related problems

A wire has a length of 2.0m and a resistance of 5.0(Omega) .Find the electric field existing inside the wire if it carries a current of 10A.

A 1m long wire of diameter 0.31mm has a resistance of 4.2 Omega . If it is replaced by another wire of same material of length 1.5m and diameter 0.155 mm , then the resistance of wire is

Find the resistance of a hollow cylindrical conductor of length 1.0m and inner and outer radii 1.0mm and 2.0mm respectively. The resistivity of the material is 2.0xx10^(-8)(Omega)m .

The potentiometer wire of length 100cm has a resistance of 10Omega . It is connected in series with a resistance of 5Omega and an accumulaot or emf 3V having negligible resistance. A source 1.2V is balanced against a length 'L' of the potentionmeter wire. find the value of L.

A potentiometer wire of length 100 cm has a resistance of 100Omega it is connected in series with a resistance and a battery of emf 2 V and of negligible internal resistance. A source of emf 10 mV is balanced against a length of 40 cm of the potentiometer wire. what is the value of the external resistance?

A potentiometer wire of length 1 m has a resistance of 10Omega . It is connected to a 6V battery in series with a resistance of 5Omega . Determine the emf of the primary cell which gives a balance point at 40cm.

A potentiometer wire of length 100 cm has a resistance of 10 Omega . It is connected in series with a resistance R and cell of emf 2 V and negligible resistance. A source of emf 10 mV is balanced against a length of 40 cm of the potentiometer wire. What is the value of R ?

A uniform potentiometer wire AB of length 100 cm has a resistance of 5Omega and it is connected in series with an external resistance R and a cell of emf 6 V and negligible internal resistance. If a source of potential drop 2 V is balanced against a length of 60 cm of the potentiometer wire, the value of resistance R is

The potentiometer wire of length 200 cm has a resistance of 20 Omega . It is connected in series with a resistance 10 Omega and an accumulator of emf 6 V having negligible internal resistance. A source of 2.4 V is balanced against length 1 of the potentiometer wire. Find the length l of the potentiometer wire. Find the length l

A potentiometer wire of length 10 m and resistance 30 Omega is connected in series with a battery of emf 2.5 V , internal resistance 5 Omega and an external resistance R . If the fall of potential along the potentiometer wire is 50 mu V mm^(-1) , then the value of R is found to be 23 n Omega . What is n ?

HC VERMA ENGLISH-ELECTRIC CURRENT IN CONDUCTORS-Exercises
  1. The current through a wire depends on time as I = i(0) + alphat, ...

    Text Solution

    |

  2. A current of 1.0 A exists in a copper wore of cross-section 1.0mm^(2)....

    Text Solution

    |

  3. A wire of length 1 m and radius 0.1mm has a resistance of 100(Omega).F...

    Text Solution

    |

  4. A uniform wire resistance 100(Omega)is melted and recast in a wire of ...

    Text Solution

    |

  5. Consider a wire of length 4m and cross-sectional areal 1 mm^(2) carryi...

    Text Solution

    |

  6. What length of a copper wire of cross-sectional area 0.01 mm^2 will be...

    Text Solution

    |

  7. Shown a conductor of length l having a circular cross section. The rad...

    Text Solution

    |

  8. A copper wire of radius 0.1mm and resistance 1k(Omega)is connected acr...

    Text Solution

    |

  9. Calculate the electric field in a copper wire of cross-sectional area2...

    Text Solution

    |

  10. A wire has a length of 2.0m and a resistance of 5.0(Omega).Find the el...

    Text Solution

    |

  11. The resistances of an iron wire and a copper wire at 20^(@)Care 3.9(Om...

    Text Solution

    |

  12. The current in a conductor and the potential difference across its end...

    Text Solution

    |

  13. Shown an arrangement to measure the emf (epsilon)and internal resistan...

    Text Solution

    |

  14. The potential difference between the terminals of a battery of emf 6.0...

    Text Solution

    |

  15. The potential difference between the terminals of a 6.0V battery is 7....

    Text Solution

    |

  16. The internal resistance of an accumulator battery of emf 6V is 10(Omeg...

    Text Solution

    |

  17. Find the value of i(1)//I(2)in figure if where R=10(Omega)

    Text Solution

    |

  18. Consider N=n(1)n(2)indentical cells, each of emf(epsilon) and internal...

    Text Solution

    |

  19. A battery of emf 100V and a resistor of resistance 10k(Omega)are joine...

    Text Solution

    |

  20. If the reading of ammeter A(1)in figure is 2.4 A, what will the ammete...

    Text Solution

    |