Home
Class 12
PHYSICS
When the diode shows saturated current, ...

When the diode shows saturated current, dynamic plate resistance is

A

zero

B

infinity

C

indeterminate

D

different for different diodes

Text Solution

Verified by Experts

The correct Answer is:
B
Promotional Banner

Topper's Solved these Questions

  • ELECTRIC CURRENT THROUGH GASES

    HC VERMA ENGLISH|Exercise Objective 2|5 Videos

  • ELECTRIC CURRENT THROUGH GASES

    HC VERMA ENGLISH|Exercise Exercise|23 Videos

  • ELECTRIC CURRENT THROUGH GASES

    HC VERMA ENGLISH|Exercise Worked out example|9 Videos

  • ELECTRIC CURRENT IN CONDUCTORS

    HC VERMA ENGLISH|Exercise questions for short answer|17 Videos

  • ELECTRIC FIELD AND POTENTIAL

    HC VERMA ENGLISH|Exercise Objective 2|7 Videos

Similar Questions

Explore conceptually related problems

A triode is operated in the liner region of its characteristics. If the plate voltage is slightly increased, the dynamic plate resistance will

When a diode is forward biased, it has a voltage drop of 0.5 V. The safe limit of current through the diode is 10 mA. If a battery of emf 1.5 V is used in the circuit, the value of minimum resistance to be connected in series with the diode so that the current does not exceed the safe limit is :

In the circuit shown, the galvanometer shows zero current. The value of resistance R is :

In the circuit shown, the galvanometer shows zero current. The value of resistance R is :

When the voltage drop across a p.n junction diode is increased from 0.65V to 0.70V , the change in the diode current is 5mA . What is the dynamic resistance of the diode?

When the voltage drop across a p-n junction is increased from 0.80 V to 0.82 V, the change in the diode current is 20 mA. What is the dynamic resistance of the diode ?

A triode value has amplification factor 21 and dynamic plate resistance 10 kOmega . This is used as an amplifier with a load of 20 kOmega) . Find the gain factor of the amplifier.

When the plate voltage applied to a diode value is changed from 40 V to 42 V , the plate current increases from 50 mA to 60 mA . Calculate the dynamic plate resistance at the operating condition.

The i-V characteristic of a p-n junction diode is shown in figure.Find the approximate dynamic resistance of the p-n junction when (a) a forward bias of 1 volt is applied ,(b) a forward bias of 2 volt is applied is applied .

Consider the junction diode is ideal. The value of current through the resistance of 200 Omega is