Home
Class 10
PHYSICS
What are the advantages of connecting el...

What are the advantages of connecting electrical devices in parallel with the battery instead of connecting them in series?

Text Solution

Verified by Experts

The advantages of connecting electrical devices in parallel with the battery instead of connecting them in series are as follows:
( 1 )A parallel combination/ circuit is helpful when each device has different resistance and reqUires different current for its operation. as in this case the total resistance of the circuit is reduced due to which the current from the battery is high and hence ear.h electrical device can draw the reqUired amount of current.
ThiS is not so in a series combination/ circuit because total resistance increases too much in series circuit due to which the current from the battery is low and the same low current flows through all the devices. irrespective of their resistances and hence devices cannot work properly.
( 2 ) In a parallel combination/ circuit each electrical device gets the same p.d. (potential difference) across it as that of the battery due to which all the devices work properly.
While in case of a series combination/ circuit the devices do not get the same p.d. as that of the battery because the p.d. is shared by all the devices connected in series.
( 3 ) In a parallel combination/ circuit if one electrical device stops working due to some defect, then other devices are not affected. They continue to work without any problem.
On the other hand, in a series combination/ circuit if one electrical device stops working due to some defect, then all other devices also stop working as the whole circuit is broken.
( 4 ) In a parallel combination/ circuit each electrical device has its own switch due to which it can be turned .ON. or turned .OFF. independently without affecting other devices.
But in a series combination/ circuit all the electrical devices have only one switch due to which they cannot be turned .OFF. or turned .ON. independently.
Promotional Banner

Topper's Solved these Questions

  • ELECTRICITY

    KUMAR PRAKASHAN|Exercise QUESTIONS AND ANSWERS (TEXTBOOK ILLUSTRATIONS)|14 Videos
  • ELECTRICITY

    KUMAR PRAKASHAN|Exercise QUESTIONS AND ANSWERS (MORE TO KNOW)|1 Videos
  • ELECTRICITY

    KUMAR PRAKASHAN|Exercise PRACTICAL SKILL BASED QUESTION WITH ANSWERS|20 Videos
  • MAGNETIC EFFECTS OF ELECTRIC CURRENT

    KUMAR PRAKASHAN|Exercise VALUE BASED QUESTIONS WITH ANSWERS|15 Videos

Similar Questions

Explore conceptually related problems

For domestic purposes, different electrical devices are connected in parallel instead of connecting them in series.

Which type of connection is done for electric appliances ?

In fig. battery E is balanced on 55cm length of potentiometer wire but when a resistance of 10Omega is connected in parallel with the battery then it balances on 50cm length of the potentiometer wire then internal resistance r of the battery is:-

It is not advisable to connect an electric bulb and electric heater in series.

First a set of n equal resistors of R each are connected in series to a battery of emf E and internal resistance R. A current I is observed to flow. Then the n resistors are connected in parallel to the same battery. It is observed that the current is increased 10 times. What is 'n'?

Resistances of three resistors are in the proportion connected in parallel, their effective resistance is 6 Omega . Then connect on if these resistance are connect in series so equivalent resistance will be .......

Why is a series arrangement not used for connecting domestric electrical applinaces in a circuit ?

n resistors, each of resistance R are first connected in series and then in parallel. What is the ratio of the total effective resistance of the circuit in the series to the parallel combination?

N batteries each of emf E and internal resistance r are first connected in series and then in parallel to an external resistance R. if current through R is same in both cases then.

Two cells of voltage 10 V and 2 V and internal resistances 10 Omega and 5 Omega respectively, are connected in parallel with the positive end of 10V battery connected to negative pole of 2 V battery (figure). Find the effective voltage and effective resistance of the combination.

KUMAR PRAKASHAN-ELECTRICITY-QUESTIONS AND ANSWERS (INTEXT QUESTIONS)
  1. How much energy is given to each coulomb of charge passing through a 6...

    Text Solution

    |

  2. On what factors does the resistance of a conductor depend ?

    Text Solution

    |

  3. Will current can flow more easily through a thick wire or a thin wire ...

    Text Solution

    |

  4. Let the resistance of an electrical component remain constant while th...

    Text Solution

    |

  5. Why are coils of electric toasters and electric irons made of an alloy...

    Text Solution

    |

  6. Use the data in Table 2 to answer the following: Which is a better c...

    Text Solution

    |

  7. Draw a schematic diagram of a circuit consisting of a battery of three...

    Text Solution

    |

  8. Redraw the circuit of 9.39, putting in an ammeter to measure the curre...

    Text Solution

    |

  9. Judge the equivalent resistance when the following are connected in pa...

    Text Solution

    |

  10. Judge the equivalent resistance when the following are connected in pa...

    Text Solution

    |

  11. An electric lamp of 100Omega, a toaster of resistance 50 Omega, and a ...

    Text Solution

    |

  12. What are the advantages of connecting electrical devices in parallel w...

    Text Solution

    |

  13. How can three resistor of resistances 2 Omega, 3 Omega and 6 Omega b...

    Text Solution

    |

  14. How can three resistor of resistances 2 Omega, 3 Omega and 6 Omega b...

    Text Solution

    |

  15. What is (a) the highest, (b) the lowest total resistance that can be s...

    Text Solution

    |

  16. Why does the cord of an electric heater not glow while the heating el...

    Text Solution

    |

  17. Compute the heat generated while transferring 96000 coulomb of charge ...

    Text Solution

    |

  18. An electric iron of resistance 20 ohm takes a current of 5 A. Calculat...

    Text Solution

    |

  19. What determines the rate at which energy is delivered by a current?

    Text Solution

    |

  20. An electric motor takes 5 A from a 220 V line. Determine the power of ...

    Text Solution

    |