Home
Class 12
PHYSICS
A steel wire of length 5 m and area of c...

A steel wire of length 5 m and area of cross-section `4 mm^(2)` is stretched by 2 mm by the application of a force. If young's modulus of steel is `2xx10^(11)N//m^(2),` then the energy stored in the wire is

A

0.64 J

B

0.16 J

C

0.32 J

D

1.28 J

Text Solution

Verified by Experts

The correct Answer is:
C
Promotional Banner

Similar Questions

Explore conceptually related problems

A metal wire of length 2.5 m and area of cross section 1.5 xx 10^-6 m^2 is stretched through 2 mm. Calculate the work done during stretching. (Y= 1.25xx 10^11 Nm^-2 ).

A steal wire of cross-section area 3xx10^(-6) m^(2) can withstand a maximum strain of 10^(-3) .Young's modulus of steel is 2xx10^(11) Nm^(-2) .The maximum mass this wire can hold is

A 20 N stone is suspended from a wire and its length changes by 1% . If the Young's modulus of the material of wire is 2xx10^(11)N//m^(2) , then the area of cross-section of the wire will be

A wire of mild steel has an initial length 1.5 m and diameter 0.60 mm gets extended by 6.3 mm when a certain force is applied to it. If Young's modulus of mild steel is 2.1 xx 10^11 N/m^2 . Calculate the force applied

A steel wire of cross sectional area 3 xx 10^-6 m^2 can withstand a maximum strain of 10^-3 . Young's modulus of steel is 2 xx 10^11 N//m^2 . The maximum mass the wire can hold is (g = 10 m//s^2)

A wire of mild steel as initial length 1.5m and diameter 0.60mm gets extended by 6.3 mm when a certain force is applied to it. If Young’s modulus of mild steel is 2.1 xx 10^11 N//m^2 , calculate force applied.

The diameter of a brass rod is 4 mm and Young's modulus of brass is 9 xx 10^(10) N//m^(2) . The force required to stretch by 0.1 % of its length is

A metal wire of length L_1 and area of cross-section A is attached to a rigid support. Another metal wire of length L_2 and of the same cross-sectional area is attached to free end of the first wire. A body of mass M is then suspended from the free end of the second wire. If Y_1 and Y_2 are the Young's moduli of the wires respectively, the effective force constant of the system of two wire is

When a wire 2 m long and 0.05 cm^(2) in cross-section is stretched by a mass of 2 kg, it increases in length by 0.04 mm. Young's modulus of the material of the wire is (g=10ms^(-2))

A wire of length 20 m and area of cross section 1.25 xx 10^(-4) m^2 is subjected to a load of 2.5 kg. (1 kgwt = 9.8N). The elongation produced in wire is 1 xx 10^(-4) m. Calculate Young’s modulus of the material.