Home
Class 12
PHYSICS
The diameter of a brass rod is 4 mm and ...

The diameter of a brass rod is 4 mm and Young's modulus of brass is `9 xx 10^(10) N//m^(2)`. The force required to stretch by 0.1 % of its length is

A

`3600 pi N`

B

36 N

C

`144 pixx10^(3)N`

D

`36pixx10^(5)N`

Text Solution

Verified by Experts

The correct Answer is:
A
Promotional Banner

Similar Questions

Explore conceptually related problems

The bulk modulus of a gas is 6xx10^(3) N//m^(2). The additional pressure needed to reduce the volume of the liquid by 10% is

The area of cross section of a steel wire (Y=2.0 xx 10^(11) N//m^(2)) is 0.1 cm^(2) . The force required to double is length will be

A steel wire of length 5 m and area of cross-section 4 mm^(2) is stretched by 2 mm by the application of a force. If young's modulus of steel is 2xx10^(11)N//m^(2), then the energy stored in the wire is

A rod of length 1000 mm and co-efficient of linear expansion alpha=10^-4 per degree is placed symmetrically between fixed walls separated by 1001 mm. Young's modulus of the rod is 10^11N//m^2. If the temperature is increased by 20^@C, then the stress developed in the rod is ("in" N//m^2):

A metallic rod breaks when strain produced is 0.2% . The Young's modulus of the material of the rod is 7xx10^(9)N//m^(2) . What should be its area of cross-section to support a load of 10^(4)N ?

A 20 N stone is suspended from a wire and its length changes by 1% . If the Young's modulus of the material of wire is 2xx10^(11)N//m^(2) , then the area of cross-section of the wire will be

A granite rod of 60 cm length is clamped at its middle point and is set into longitudinal vibrations. The densit of grantite is 2.7 xx 10^(3) kg// m^(3) and its Young's modulus is 9.27 xx 10^(10) Pa. WHat will be the fundamental frequency of the longitudinal vibrations?

The bulk modulus of rubber is 9.8xx10^(8)N//m^(2). To what depth a rubber ball be taken in a lake so that its volume is decreased by 0.1%?

The strain energy per unit volume is 6.25 xx lO^-4 J/m^3 .The young’s Modulus of the wire is 2 xx 10^10 N//m^2 . Calculate strain.

A steel wire of cross sectional area 3 xx 10^-6 m^2 can withstand a maximum strain of 10^-3 . Young's modulus of steel is 2 xx 10^11 N//m^2 . The maximum mass the wire can hold is (g = 10 m//s^2)