Home
Class 12
PHYSICS
Calculate the force required to separate...

Calculate the force required to separate the glass plates of area `10^(-2)m^(2)` with a film of water 0.05 mm thickness between them (surface tension of water `=70xx10^(-3)N//m)`)

A

28N

B

14 N

C

50 N

D

38 N

Text Solution

Verified by Experts

The correct Answer is:
A
Promotional Banner

Similar Questions

Explore conceptually related problems

Calculate the force required to take away a flat circular plate of radius 0.01 m from the surface of water. The surface tension of water is 0.075 N/m .

The force of surface tension on a ring situated on the surface of water is 14pixx10^-4N . Then the diameter of the ring is (Surface tension of water =70xx10^-3 N//m

Calculate the force required to move a flat metal plate of area 25cm^2 with a uniform velocity of 20 m//s over the surface of a liquid 1 mm thick if the coefficient of viscosity (n) is 2 Ns//m^2

What should be the diameter of a water drop so that the excess pressure inside it is 80 N//m^2 ? (surface tension of water = 7.2 xx 10^-2 N//m )

Calculate the capacitance of a parallel plate condenser of two plates of area 10^4 cm^2 each separated by 4 mm thick glass sheet of k =4.

A film is held on a ring of area 0.05m^2 of liquid of surface tension 0.05 N/m, then the surface energy is

A liquid of density 850 kg//m^3 has an unknown surface tension . However , it is observed that if rises three times high in a capillary tube as compared to pure water . If the contact angles for both are same , then the surface tension of liquid is (Surface tension of water = 7.0xx10^(-2) N//m )

Water rises in a capillary tube to a certain height such that the upward force due to surface tension is balanced by 75 xx 10^-4 N , forces due to the weight of the liquid. If the surface tension of water is 6 xx 10^-2 N//m , the inner-circumference of the capillary must be

When one end of the capillary is dipped in water, the height of water column is 'h' . The upward force of 105 dyne due to surface tension is balanced by the force due to the weight of water column . The inner circumference of the capillary is (Surface tension of water = 7 xx 10^(-2) N//m )