Home
Class 12
PHYSICS
In a stretched wire under tension and fi...

In a stretched wire under tension and fixed at both ends, the area of cross section of the wire is halved and the tension is doubled. The frequency of the wire will be

A

n

B

2n

C

3n

D

`sqrt2n`

Text Solution

Verified by Experts

The correct Answer is:
B
Promotional Banner

Similar Questions

Explore conceptually related problems

The length and cross-section of the wire of meter bridge are

When radius of wire is doubled, the elongation dl of the wire

A uniform wire under tension , is fixed at its ends. If the ratio of tension in the wire to the square of its length is 360 dyne /cm^2 and fundamental frequency of vibration of wire is 300Hz , find its linear density.

The length of a wire is l_A when the tension in it is T_A and of another wire is l_B when the tension is T_B . The original length of the wire is

Choose correct alternative. Two wires of same material and same length are connected in series. The area of cross section of wires is in ratio 3:1 . The resistance of thicker wire is 10 Omega . The total resistance of combination is

A tuning fork gives 4 beats per second with a sonometer wire under tension of 26 N. If the tension on the wire is decreased to 24 N the number of beats remains the same before. What is the frequency of the tuning fork?

Two wires A and B are stretched by the same load. If the area of cross-section of wire 'A' is double that of 'B,' then the stress on 'B' is

A composite wire is prepared by joining a tungsten wire and steel wire end to end. Both the wires are of the same length and the same area of cross section. If this composite wire is suspended to a rigid support and a force is applied to its free end, it gets extended by 3.25mm. Calculate the increase in length of tungsten wire and steel wire separately

Two tuning forks produces 5 beats per second when sounded together.One of them is in unison with a wire 90 cm long subjrcted to a certain tension , while the other is in unison with a length of 91 cm of the same wire under same tension. Determine the frequencies of the forks.

A wire carries a current of 0.3 A. Calculate the charge passing through the cross section of the wire in two minutes.