What is the stress in a wire which is 50 meter long and 0.01cm2 in crosssection, if the wire bears a load of 100 kg?

What is the stress in the wire which is 50 m long and 0.01 cm^2 in cross section, if the wire bears a load of 100 kg

The stress in a wire of diameter 2 mm, if a load of 100 g is applied to a wire, is

When a wire 2 m long and 0.05 cm^(2) in cross-section is stretched by a mass of 2 kg, it increases in length by 0.04 mm. Young's modulus of the material of the wire is (g=10ms^(-2))

What is the strain in a wire cable of original length 50m whose length increases by 2.5cm when a load is lifted?

What is the strain in a wire cable of original length 50m, whose length increases by 2.5cm. when a load islifted?

Two wires of the same material and the same cross section are stretched on a sonometer in seccuession. Length of one wire is 60 cm and that of the other is 30 cm. An unknown load is applied to the first wire and second wire is loaded with 1.5 kg. if both the wires vibrate with the same fundamental frequencies, calculate the unknown load.

Two wires of the same material and same cross section are stretched on a sonometer. One wire is loaded with 1.5 kg and another is loaded with 6 kg. The vibrating length of first wire is 60 cm and its fundamental frequency of vibration is the same as that of the second wire. Calculate vibrating length of the other wire.

A potentiometer has uniform potential gradient. The specific resistance of the material of the potentiometer wire is 10^(-7) ohm-metre and the current passing through it is 0.1 ampere, cross-section of the wire is 10^(-6)" m"^(2) . The potential gradient along the potentiometer wire is