Home
Class 11
PHYSICS
Three bars of equal lengths and equal ar...

Three bars of equal lengths and equal area of cross-section are connected in series fig. their thermal conducitives are in the ratio `2:3:4`. If at the steady state the open ends of the first and the last bars are at temperature `200^(@)C` and `20^(@)C` respectively, find the temperature of both the junctions.
.

Text Solution

Verified by Experts

Let the temperature of the junction B and C be `theta_(1)` and `theta_(2)`, respectively. In the steady state, the rate of flow of heat through all rods will be the same.
Therefore, Heat transfer `H = (2K) A(200-theta_(1))/L`
(4K)A(theta_(1)-theta_(2))/L= (3K) A(theta_(2) - 18)/L)`
or `2(200-theta_(1)) = 4(theta_(1)-theta_(2)) = 3(theta_(2)-18)`
Solving, `theta_(1)=116^(@)`C, `theta_(2)=74^(@)`C
Promotional Banner

Topper's Solved these Questions

  • CALORIMETRY AND HEAT TRANSFER

    DC PANDEY ENGLISH|Exercise Check point 16.1|10 Videos
  • CALORIMETRY AND HEAT TRANSFER

    DC PANDEY ENGLISH|Exercise Check point 16.2|10 Videos
  • CALORIMETRY & HEAT TRANSFER

    DC PANDEY ENGLISH|Exercise Level 2 Subjective|14 Videos
  • CENTRE OF MASS

    DC PANDEY ENGLISH|Exercise Medical entrances gallery|27 Videos

Similar Questions

Explore conceptually related problems

Three bars of equal lengths and equal areas of cross-section are connected in series. Their thermal conductivities are in the ratio of 2:4:3. If the open ends of the first and last bars are at temperatures 20^(@)C and 18^(@)C respectively in the steady state calculate the temperature of both the junctions.

Three cylindrical rods A, B and C of equal lengths and equal diameters are joined in series as shown if Fig. Their thermal conductivities are 2K, K and 0.5K, respectively. In steady state, if the free ends of rods A and C are at 100^@C and 0^@C , respectively, calculate the temperature at the two junction points. Assume negligible loss by radiaiotn through the curved surface. What will be the equivalent thermal conductivity?

Three rods A, B and C of the same length and same cross-sectional area are joined as shown. Their thermal conductivities are in the ratio 1:2:3/2. If the open ends of A and C are at 200^@ C and 18^@ C, respectively, then the temperature at the junction of A at steady state is

Twelve conducting rods from the sides of a uniform cube of side l. If in steady state, B and H ends of the cube are at 100^(@)C and 0^(@)C respectively. Find the temperature of the junction 'A' :-

Two walls of thickness in the ratio 1:3 and thermal conductivities in the ratio 3:2 form a composite wall of a building. If the free surfaces of the wall be at temperatures 30^@C and 20^@C , respectively, what is the temperature of the interface?

Three rods AB, BC and BD having thermal conductivities in the ratio 1:2:3 and lengths in the ratio 2:1:1 are joined as shown in Fig. The ends A, C and D are at temperature T_1 , T_2 and T_3 respectively Find the temperature of the junction B. Assume steady state.

Two bars of same length and same cross-sectional area but of different thermal conductivites K_(1) and K_(2) are joined end to end as shown in the figure. One end of the compound bar it is at temperature T_(1) and the opposite end at temperature T_(2) (where T_(1) gt T_(2) ). The temperature of the junction is

Three rods of equal length, area of cross section and thermal conductivity are connected as shown in the figure. There is no heat loss through lateral surface of the rods and temperature of ends are T_(A)=100^(@)C, T_(B)=70^(@)C and T_(C)=50^(@)C . Find the temperature of junction.

Two bars of thermal conductivities K and 3K and lengths 1 cm and 2 cm respectively have equal cross-sectional area, they are joined lengths wise as shown in the figure. If the temperature at the ends of this composite br is 0^(@)C and 100^(@)C respectively (see figure), then the temperature phi of the interface is

In the figure ABC is a conducting rod whose lateral surfaces are insulated. The length of the section AB is one-half of that of BC, and the respective thermal conductivities of the two sections are as given in the figure. If the ends A and C are maintained at 0^(@)C and 70^(@)C respectively, the temperature of junction B in the steady state is

DC PANDEY ENGLISH-CALORIMETRY AND HEAT TRANSFER-Medical entrance s gallery
  1. Three bars of equal lengths and equal area of cross-section are connec...

    Text Solution

    |

  2. A black body is at a temperature of 5760 K. The energy of radiation em...

    Text Solution

    |

  3. A piece of ice falls from a height h so that it melts completely. Only...

    Text Solution

    |

  4. The two ends of a metal rod are maintained at temperature 100^(@)C and...

    Text Solution

    |

  5. The black body spectrum of an object O(1) is such that its radiant int...

    Text Solution

    |

  6. Two plates of equal area are placed in contact with each other. The th...

    Text Solution

    |

  7. If the wavelength corresponding to maximum energy radiated from the mo...

    Text Solution

    |

  8. A solid at temperature T(1) is kept in an evacuated chamber at tempera...

    Text Solution

    |

  9. A black body with surface area 0.001 m^(2) is heated upto a temperatur...

    Text Solution

    |

  10. Identify the incorrect statement.

    Text Solution

    |

  11. Water is being boiled in a flat bottomed kettle placed on a stove . Th...

    Text Solution

    |

  12. A cylinder of radius R made of a material of thermal conductivity K1 i...

    Text Solution

    |

  13. on observing light form three different stars P, Q and R, it was foun...

    Text Solution

    |

  14. A piece of ice of mass 100 g and at temperature 0^@ C is put in 200 g ...

    Text Solution

    |

  15. A pan filled with hot food cools from 94^(@)C to 86^(@)C in 2 minutes ...

    Text Solution

    |

  16. 1 g of ice at 0^@C is mixed with 1 g of steam at 100^@C. After thermal...

    Text Solution

    |

  17. Stream at 100^(@)C is passed into 20 g of water at 10^(@)C. When water...

    Text Solution

    |

  18. A 10 W electric heater is used to heat a container filled with 0.5 kg ...

    Text Solution

    |

  19. A block of ice of mass 50kg is sliding on a horizontal plane. It start...

    Text Solution

    |

  20. Same quantity of ice is filled in each of the two metal container P an...

    Text Solution

    |

  21. Two identical rods are connected between two containers. One of them i...

    Text Solution

    |