Home
Class 11
PHYSICS
Two metal cubes with 3 cm- edges of copp...

Two metal cubes with 3 cm- edges of copper and aluminium are arranged as shown in figure. Find
(a)the total thermal current from one reservoir to the other
(b) the ratio of the thermal current carried by the copper cube to that carried by the aluminium cube. Thermal conductivity of copper is 401 `W//m.K` and that of aluminium id 237 `W//m.K` .

Text Solution

Verified by Experts

i) Thermal resitance of aluminium cube, `R_(1) = l/KA`
or `R_(1)=(3.0 xx 10^(-2))/(237)(3.0 xx 10^(-2))^(2)`
`0.14 KW^(-1)`
and thermal resistance of copper cube, `R_(2) = l/(KA)`
or `R_(2) = (3.0 xx 10^(-2))/(401)(3.0 xx 10^(-2))^(2)`
Aw these two resistance are in paralle, their equivalent resistance will be
`R=(R_(1)R_(2))/(R_(1)+R_(2))= ((0.14)(0.08))/(0.14) + (0.08) = 0.05 KW^(-1)`
`therefore` Thermal current, H= ("Temperature difference")/("Thermal resistance")`
`(100-20)/(0.05) = 1.6 xx 10^(3)`W
ii) Parallel, thermal current distributing in the inverse ratio of resistance. Hence ,
`(H_(Cu)/H_(Al) = R_(Al)/R_(Cu) = R_(1)/R_(2)=0.14/0.08 = 1.75`
Promotional Banner

Topper's Solved these Questions

  • CALORIMETRY AND HEAT TRANSFER

    DC PANDEY ENGLISH|Exercise Check point 16.1|10 Videos
  • CALORIMETRY AND HEAT TRANSFER

    DC PANDEY ENGLISH|Exercise Check point 16.2|10 Videos
  • CALORIMETRY & HEAT TRANSFER

    DC PANDEY ENGLISH|Exercise Level 2 Subjective|14 Videos
  • CENTRE OF MASS

    DC PANDEY ENGLISH|Exercise Medical entrances gallery|27 Videos

Similar Questions

Explore conceptually related problems

The ends of a copper rod of length 1m and area of cross-section 1cm^2 are maintained at 0^@C and 100^@C . At the centre of the rod there is a source of heat of power 25 W. Calculate the temperature gradient in the two halves of the rod in steady state. Thermal conductivity of copper is 400 Wm^-1 K^-1 .

The ends of a copper rod of length 1m and area of cross-section 1cm^2 are maintained at 0^@C and 100^@C . At the centre of the rod there is a source of heat of power 25 W. Calculate the temperature gradient in the two halves of the rod in steady state. Thermal conductivity of copper is 400 Wm^-1 K^-1 .

A copper rod of length 75 cm and an iron rod of length 125cm are joined together end to end . Both are of circular cross section with diameter 2 cm . The free ends of the copper and iron are maintained at 100^@C and 0^@C respectively . The surface of the bars are insulated thermally . The temperature of the copper -iron junction is [Thermal conductivity of the copper is 386.4 W//m-K and that of iron is 48.46W//m-K ].

A copper rod 2 m long has a circular cross-section of radius 1 cm. One end is kept at 100^@C and the other at 0^@C . The surface is insulated so that negligible heat is lost through the surface. In steady state, find (a) the thermal resistance of the bar (b) the thermal current H (c) the temperature gradient (dT)/(dx) and (d) the temperature at a distance 25 cm from the hot end. Thermal conductivity of copper is 401 W//m.K.

Three metal rods made of copper, aluminium and brass, each 20 cm long 4cm in diameter, are placed end to end with aluminium between the other two. The free ends of copper and brass are maintained at 100 and 0^(@)C respectively. Assume that the thermal conductivity of copper is twice that of aluminium and four times that of brass. The approximately equilibrium temperatures of the copper-aluminiu and aluminium-brass junctions are respectively.

The ends of copper rod of length 1m and area of cross section 1cm^(2) are maintained at 0^(@)C and 100^(@)C . At the centre of rod, there is a source of heat of 32W . The thermal conductivity of copper is 400W//mK

One end of a brass rod of length 2.0 m and cross section 1cm^2 is kept in steam at 100^@C and the other end in ice at 0^@C . The lateral surface of the rod is covered by heat insulator. Determine the amount of ice melting per minute. Thermal conductivity of brass is 110 W//m-K and specific latent heat of fusion of ice is 80 cal//g .

A copper rod 2 m long has a circular cross-section of radius 1 cm. One end is kept at 100^@C and the other at 0^@C . The surface is insulated so that negligible heat is lost through the surface. In steady state, find (a) the thermal resistance of the bar (b) the thermal current H (c) the temperature gradient (dT)/(dx) and (d) the temperature at a distance 25 cm from the hot end. Thermal conductivity of copper is 401 W//m-K.

A uniform copper rod 50 cm long is insulated on the sides, and has its ends exposedto ice and steam,respectively. If there is a layer of water 1 mm thick at each end, calculate the temperature gradient in the bar. The thermal conductivity of copper is 436 W m^(-1) K^(-1) and that of water is 0.436 Wm^(-1) K^(-1) .

Find the thermal resistance of an aluminium rod of length 20cm and area of cross section 1cm^(2) . The heat current is along the length of the rod. Thermal conductivity of aluminium =200Wm^(-1)K^(-1) .

DC PANDEY ENGLISH-CALORIMETRY AND HEAT TRANSFER-Medical entrance s gallery
  1. Two metal cubes with 3 cm- edges of copper and aluminium are arranged ...

    Text Solution

    |

  2. A black body is at a temperature of 5760 K. The energy of radiation em...

    Text Solution

    |

  3. A piece of ice falls from a height h so that it melts completely. Only...

    Text Solution

    |

  4. The two ends of a metal rod are maintained at temperature 100^(@)C and...

    Text Solution

    |

  5. The black body spectrum of an object O(1) is such that its radiant int...

    Text Solution

    |

  6. Two plates of equal area are placed in contact with each other. The th...

    Text Solution

    |

  7. If the wavelength corresponding to maximum energy radiated from the mo...

    Text Solution

    |

  8. A solid at temperature T(1) is kept in an evacuated chamber at tempera...

    Text Solution

    |

  9. A black body with surface area 0.001 m^(2) is heated upto a temperatur...

    Text Solution

    |

  10. Identify the incorrect statement.

    Text Solution

    |

  11. Water is being boiled in a flat bottomed kettle placed on a stove . Th...

    Text Solution

    |

  12. A cylinder of radius R made of a material of thermal conductivity K1 i...

    Text Solution

    |

  13. on observing light form three different stars P, Q and R, it was foun...

    Text Solution

    |

  14. A piece of ice of mass 100 g and at temperature 0^@ C is put in 200 g ...

    Text Solution

    |

  15. A pan filled with hot food cools from 94^(@)C to 86^(@)C in 2 minutes ...

    Text Solution

    |

  16. 1 g of ice at 0^@C is mixed with 1 g of steam at 100^@C. After thermal...

    Text Solution

    |

  17. Stream at 100^(@)C is passed into 20 g of water at 10^(@)C. When water...

    Text Solution

    |

  18. A 10 W electric heater is used to heat a container filled with 0.5 kg ...

    Text Solution

    |

  19. A block of ice of mass 50kg is sliding on a horizontal plane. It start...

    Text Solution

    |

  20. Same quantity of ice is filled in each of the two metal container P an...

    Text Solution

    |

  21. Two identical rods are connected between two containers. One of them i...

    Text Solution

    |