Home
Class 12
PHYSICS
In LCR circuit as shown in figure...

In LCR circuit as shown in figure

A

current will lead the voltage

B

rms value of current is 20A

C

power factor of circuit is `(1)/(sqrt2)`

D

voltage drop across resistance is 100V

Text Solution

Verified by Experts

The correct Answer is:
A, C
Promotional Banner

Similar Questions

Explore conceptually related problems

In the series LCR circuit as shown in figure, the heat developed in 80 seconds and amplitude of wattless current is :

In the L-C-R circuit as shown in figure,

In the LCR circuit shown in figure unknown resistance and alternating voltage source are connected.When swith S is closed then there is a phase difference of pi/4 between current and applied voltage and voltage across resister is 100/sqrt2 V .When switch is open current and applied voltage are in same phase.Neglecting resistance of connecting wire answer the following questions : Resonance frequency of circuit is:

In the LCR circuit shown in figure unknown resistance and alternating voltage source are connected.When swith S is closed then there is a phase difference of pi/4 between current and applied voltage and voltage across resister is 100/sqrt2 V .When switch is open current and applied voltage are in same phase.Neglecting resistance of connecting wire answer the following questions : Average power consumption in the circuit when S is open:

Potential difference across AB in the circuit as shown in figure.

The current in the LCR circuit shown in the figure is observed to lead the voltage in phase. Without making any other change in the circuit, a capacitor, of capacitance C_0 is (appropriately) joined to the capacitor C. This results in making the current, in the joined to the capacitor C. This results in making the current, in the modified' circuit, flow in phase with the applied voltage. Draw a diagram of the modified circuit and obtain an expression of C_0 in terms of Omega , L and C.

The circuit as shown in the figure is equivalent to

In the circuit shown in figure the current through

In the circuit shown in figure , V must be

The power factor of the circuit as shown in figure is