A galvanometer having a coil resistance 120`Omega` shows full scale deflection for a current of 2.5 mA. How would you convert it into an ammeter of range 0 to 75A?

A galvanometer coil has a resistance of 10Omega and the meter shows full scale deflection for a current of 2.5 mA. How will you convery the metre into an ammeter of range 0 to 4A.

A galvanometer having a resistance of 50Ω gives a full scale deflection for a current of 0.05 A. The length in meter of a resistance wire of area of cross section 3×10^−3 cm^2 that can be used to convert the galvanometer into an ammeter which can read a maximum of 5A current is [specific resistance of the wire =5×10^−7 Ωm]

A galvanometer has an internal resistance of 1.0 ohm. It gives maximum deflection for current of 50 mA. Show how it can be converted into (i) a voltmeter with a maximum reading a of 2.5 volts, (ii) an ammeter with a maximum reading of 2.5 A.

A moving coil galvanometer has resistance 50 Omega . The maximum bearable current is 100mA. How will you convert it into (i) a voltmeter to record 100V p.d.? and (ii) an ammeter to measure 5A current?

A miliammeter of resistance 5 ohms gives a full scale deflection for a current of 15 mA. If the milliammeter is to be used to measure currents upto 1.5 A the size of the resistance that must be attached to the milliammeter is ?

How will you convert galvanometer which needs 50 mA for full scale deflection into a voltmeter reading upto 2.5 volts ? The resistance of the galvanometer is 10 ohms.