Home
Class 11
BIOLOGY
Scales are found in...

Scales are found in

A

pisces

B

rabbit

C

human

D

rat

Text Solution

AI Generated Solution

Promotional Banner

Similar Questions

Explore conceptually related problems

Placoid scales are found is

Which type of scales are found on the skin of cartilaginous fishes ?

The edge of a cube is measured using a vernier callipers. [ 9 divisions of the main scale is equal to 10 divisions of the vernier scale and 1 main scale dividsion is 1 mm ]. The main scale division reading is 10 and 1st division of vernier scale was found to be coinciding with the main scale. The mass of the cube is 2.736 g . Calculate the density in g//cm^3 upto correct significant figures.

A vernier callipers has its main scale graduated in mm and 10 divisions on its vernier scale are equal in length to 9 mm. When the two jaws are in contact, the zero of vernier scale is ahead of zero of main scale and 3rd division of vernier scale coincides with a main scale division. Find the least count .

The temperature of a body on Kelvin scale is found to be x K . When it is measured by Fahrenheit thermometer, it is found to be x^(@)F , then the value of x is

The temperature of a body on Kelvin scale is found to be x K . When it is measured by Fahrenheit thermometer, it is found to be x^(@)F , then the value of x is

The length of a rectangular plate is measured by a meter scale and is found to be 10.0 cm . Its width is measured by vernier calipers as 1.00 cm . The least count of the meter scale and vernier calipers are 0.1 cm and 0.01 cm respectively. Maximum permissibe error in area measurement is.

The length of a rectangular plate is measured by a meter scale and is found to be 10.0 cm . Its width is measured by vernier callipers as 1.00 cm . The least count of the meter scale and vernier calipers are 0.1 cm and 0.01 cm respectively. Maximum permissibe error in area measurement is.

The pitch of a screw gauge is 0.5m and there are 50 divisins on its circular scale and one man scale division =0.5mm . Before starting the measurement, it is found that when jaws of the screw gauge are brought in contact, the zero of the circular scale lies 5 divisions above the reference line. When a metallic wire is placed betwen the jaws, four main scale divisions are clearly visible and 16^(th) division on the circular scale coincides with the reference line. The diameter of the wire is

A screw gauge with a pitch of 0.5 mm and a circular scale with 50 division is used to measure the thickness of a thin sheet of aluminium. Before starting the measurement, it is found that when the two jaws of the screw are brought in constant, 45th division coincides with the main scale line and that the zero of main scale line and that the zero of main scale is barely visible. What is the thickness of the sheet, if the main scale reading is 0.5 mm and 25th division coincides with the main scalel line ?