The small piston of a hydrolic press is hav.ing area of` 0 .09 m^2` & larger piston has.area `1.8 m^2`. If` (100 kg xx g)` weight is applied on the small piston then what will be the force -on the large piston?

The diameter of the smaller piston of a Hydraulic press is d_1 and the larger piston is d_2 . If the applied force on the smaller piston is F_1 then the value of the force F_2 on the larger piston is

The diameters of the larger and the smaller pistons of a hydraulic press are 45 cm and 5 cm respectively. Find the magnitude of the force that has to be applied on the smaller piston to produce a 4050 N thrust on the larger piston.

The diameters of the smaller and the larger pistons of a hydraulic press are 5 cm and 45 cm respectively. What force should be applied on the smaller piston of the press, so that the thrust developed on the larger piston is 39690 N?

The diameters of the smaller and larger pistons of a hydraulic press are d_(1)andd_(2) respectively. If the force applied on the smaller piston is F_(1) , then the force developed on the larger piston will be

The lengths of the two arms of a first class lever used in a hydraulic press are 20 cm and 100 cm. The radii of the larger and the smaller pistons are 30 cm and 3 cm respectively. If a force of 196 N is applied at the handle of the lever, then what thrust will be developed on the larger piston?

The ratio of the diameters of the smaller and the larger pistons of a hydraulic press is 1 : 5. The ratio of the lengths of the arms of the lever used is 1 : 8. If a force of 490 N is applied at the handle of the lever, then how much thrust will be developed on the larger pistion?

The diameters of the two pistons of a hydraulic pressare 0.1 m and 1 m. The lengths of the two arms of a first class lever are 0.15 m and 0.9 m. A 50 N force is applied at the end of the lever. Determine the total thrust developed on the larger piston.

The diameters of the two pistons of a hydraulic pressare 8 cm and 80 cm. The smaller piston is attached at a distacne of 60 cm from the fulcrum of the lever whose total length is 360 cm. To develop a thrust of 49 N on the larger piston, what force should be applied at the handle of the lever?