Home
Class 12
PHYSICS
Show that the current leads the voltage ...

Show that the current leads the voltage in phase by `pi//2` in an a.c. circuit containing an ideal capacitor.

Text Solution

Verified by Experts

Apply `q=CV =(V_(0) sin omega t) xx C and I=(d q)/(dt),` calculate I.
Promotional Banner

Similar Questions

Explore conceptually related problems

Derive an experssion for the average power in LCR circuit connected to a.c. supply. Hence define power factor. Show that average power cousumed per cycle in an a.c. circuit conataining an ideal capacitor is zero.

In an AC circuit containing only capacitance the current

In a circuit, the current lags behind the voltage by a phase difference of pi//2 , the circuit will contain which of the following ?

The current in the LCR circuit shown in the figure is observed to lead the voltage in phase. Without making any other change in the circuit, a capacitor, of capacitance C_0 is (appropriately) joined to the capacitor C. This results in making the current, in the joined to the capacitor C. This results in making the current, in the modified' circuit, flow in phase with the applied voltage. Draw a diagram of the modified circuit and obtain an expression of C_0 in terms of Omega , L and C.

The phase angle between current and voltage in a purely inductive circuit is

Phase difference between voltage and current in a capacitor in an ac circuit is

The phase difference between voltage and current in an AC circuit containing a resistor and an inductor in series is phi_1 . When the inductor is replaced by a capacitor , the phase difference is changed to phi_2 . The phase difference when all the three elements are connected in series with the same AC source will be

In a series AC circuit containing a capacitor and a resistor only

In an ac circuit, the current lags behind the voltage by pi//3 . The components in the circuit are

(i) Find the value of the phase difference between the current and the voltage in the series LCR circuit shown below. Which one leads in phase : current or voltage ? (ii) What making any other change, find the value of the additional capacitor C, to be connected in parallel with the capacitor C, in order to make the power factor of the circuit unity.