Home
Class 12
PHYSICS
The potentiometer is best for measuring ...

The potentiometer is best for measuring voltage as:

A

it uses a sensitive galvanometer

B

it does not disturb the potential difference it measures

C

it is an elaborate arrangement

D

it has a long wire hence heat developed is quickly radiated

Text Solution

Verified by Experts

The correct Answer is:
B
Promotional Banner

Similar Questions

Explore conceptually related problems

A potentiometer can be used to measure

Assertion : Potentiometer is used only to compare potential differences. Reason: The potentiometer draws current from the voltage source being measured .

A standard cell of emf e_(0)=1.11 V is balanced against 72 cm length of a pootentiometer. The same potentiometer is used to measure the potential difference across the stndard resistance R=120 Omega . When the ammeter shows a current of 7.8 mA, a balanced lengh of 60 xm is obtained on the potentiometer. (i) Determine the current following through the resistor. (ii) Estimate the error in measurement of the ammeter.

A potentiometer is an ideal device of measuring potential difference because

A potentiometer is an ideal device of measuring potential difference because

The wire of potentiometer is made of

In the primary circuit of a potentiometer, a cell of E.M.F 1 V and a rheostat of 15 Omega are connected in series. If the resistance of the potentiometer wire is 10 Omega the minimum voltage at the ends of the wire (in V) will be

A : The ammeters and volmetrs used for measuring alternating current and voltages have non-uniform divisons on their scales. R : The instruments used for measuring alternating current and voltage are based on heating effect of current.

In a potentiometer experiment if the voltage across resistance R and R + r are balanced at the length l_1 and l_2 respectively the value of resistance r will be

A resistance of R draws current from a potentiometer. The potentiometer wire, AB , has a total resistance of R_(0) , A voltage V is supplied to the potentiometer. Derive an expression for the voltage across R when the sliding contact is in the middle of potentialmeter wire.