Home
Class 12
PHYSICS
A 200 km telephone wire has capacity of ...

A 200 km telephone wire has capacity of `0.014 muF km^(-1)`. If it carries an alternating current oif frequency 50kHz, what should be the value of an inductance required to be connected in series so that impedance is minimumn ?

Text Solution

Verified by Experts

Capacitance `C=0.014xx200 mu F = 2.8 xx 10^(-6)F`
Frequency ` f = 50 kC//s = 50 xx 10^(3)` cycles/s.
The impedance will be minimum at resonant frequency, when applied frequency will be same as resonant frequency `(f_(0)=f)`.
The resonant frequency `f_(0) = (1) / ( 2pi sqrt(LC))rArr L = (1) / ( 4 pi^(2) f_(0)^(2)C)`
`L=(1)/(4xx(22)/(7)xx(22)/(7) xx (50xx10^(3))^(2)xx(2.8xx10^(-6)))=0.36xx10^(-3)H`
Promotional Banner

Topper's Solved these Questions

  • ALTERNATING CURRENT

    AAKASH INSTITUTE ENGLISH|Exercise Try Yourself|15 Videos

  • ALTERNATING CURRENT

    AAKASH INSTITUTE ENGLISH|Exercise Assignment (Section - A) ( Objective Type Questions ( One option is correct))|40 Videos

  • ATOMS

    AAKASH INSTITUTE ENGLISH|Exercise ASSIGNMENT SECTION J (Aakash Challengers )|5 Videos

Similar Questions

Explore conceptually related problems

A telephone wire of length 200 km has a capacitance of 0.01 4 muF per km . If it carries an AC of frequency 5kHz what should be the value of an inductor required to be connected in series so that impedence of the circuit is minimum ?

The diode used in the circuit shown in the figure has a constant voltage drop of 0.5 V at all currents and a maximum power rating fo 100 milliwatts. What should be the value of the resistor R , connected in series with the diode for obtaining maximum current?

The diode used in the circuit shown in the figure has a constant voltage drop of 1 V at all current and a maximum power rating of 100 mW . What should be the value of the resistor R, connected in series with the diode for obtaining maximum current put less l?

The diode used in the circuit shown in the adjacent figure has a constant voltage drop of 0.5V at all currents and a maximum power rating of 100mW.What should be the value of resistor R connected in series with the diode for obtaining maximum current?

An alternating emf of 200V, 50Hz is applied to an L-R circuit, having a resistances R of 10Omega and an inductance L of 0.05H connected in series. Calculate: Impedance

A coil of inductance L = 5//8 H and of resistance R = 62.8 (Omega) is connected to the mains alternating voltage of frequency 50 Hz. What can be the capacitance of the capacitor (in (mu)F) connected in series with the coil if the power dissipated has to remain unchanged? Take (pi)^(2) = 10 .

An inductor of inductance 100 mH is connected in series with a resistance, a variable capacitance and an AC source of frequency 2.0 kHz . What should be the value of the capacitance so that maximum current may be drawn into the circuit?

A coil of inductance L=5H and resistance R=55Omega is connected in series to the mains alternating voltage of frequency f=50Hz in series. What can be the non-zero capacitance of the capacitor (in muF ) connected in series with the coil, if the power dissipated has to remain unchanged. (take pi^(2)=10 )

An alternating emf of 200V, 50Hz is applied to an L-R circuit, having a resistances R of 10Omega and an inductance L of 0.05H connected in series. Calculate: Current flowing in the circuit

An AC circuit drawing power from a source of angular frequency "50 rad s"^(-1) has a power factor of 0.6. In this condition, a resistance of 100Omega is present and the current is lagging behind the voltage. If a capacitor is connected in series, then the required capacitance that will result in a power factor of unity is