The increase in pressure required to dec...

The increase in pressure required to decrease the 200 L volume of a liquid by 0.008 % in kPa is (Bulk modulus of the liquid = 2100 M Pa is )

8.4

92.4

168

Text Solution

AI Generated Solution

Topper's Solved these Questions

MECHANICAL PROPERTIES OF SOLIDS
AAKASH INSTITUTE ENGLISH|Exercise Assignment(Section-D)|14 Videos
MECHANICAL PROPERTIES OF SOLIDS
AAKASH INSTITUTE ENGLISH|Exercise Assignment(Section-B)|26 Videos
MECHANICAL PROPERTIES OF FLUIDS
AAKASH INSTITUTE ENGLISH|Exercise SECTION - J|9 Videos
Mock test 03
AAKASH INSTITUTE ENGLISH|Exercise EXAMPLE|44 Videos

Similar Questions

Explore conceptually related problems

An increases in pressure required to decreases the 200 litres volume of a liquid by 0.004% in container is: (bul modulus of the liquid =2100MPa )

The increase in pressure required to decrease volume by 0.005% of 150 litre liquid (in kPa) is (Bulk modulus of liquid, B=3 x 10^9 N/m^2 )

The extra pressure required to decrease the volume of a liquid of Buik modulus 2.5 GPa by 0.01% is

Find the increase in pressure required to decrease the volume of a water sample of 0.01%. Bulk modulus of water =2.1xx10^9Nm^-2 .

How much pressure should be applied on a litre of water if it is to be compressed by 0.1%? (Bulk modulus of water= 2100 MPa)

How much should the pressure be increased in order to decrease the volume of a gas 5% at a constant temprature ?

When a liquid is subjected to a 15 atmospheric pressure, then its volume decreases by 0.1%. Then bulk modulus of elasticity (K) of the liquid is (1 atm pressure = 10^(5) N//m^(2) )

An cube is shifted to a depth of 100 m is a lake. The change in volume is 0.1% . The bulk modulus of the material is

Vapor pressure of a liquid decreases with increases in ........

100mL of a liquid is contained in an insulated container at a pressure of 1bar. The pressure is steeply increased to 100 bar. The volume of the liquid is decreased by 1mL at this constant pressure. Find DeltaH and DeltaU .

AAKASH INSTITUTE ENGLISH-MECHANICAL PROPERTIES OF SOLIDS-Assignment(Section-C)

A rope 1 cm in diameter breaks, if the tension in it exceeds 500 N. Th...
Text Solution
|
A wire of length L and radius r is clamped at one end. On stretching t...
Text Solution
|
The increase in pressure required to decrease the 200 L volume of a li...
Text Solution
|
Which of the following relations is true?
Text Solution
|
A 5 m long aluminium wire (Y=7xx10^(10) Nm^(-2)) of diameter 3 mm supp...
Text Solution
|
Two steel wires of the same radius have their lengths in the ratio of ...
Text Solution
|
A steal wire of cross-section area 3xx10^(-6) m^(2) can withstand a m...
Text Solution
|
The hollow shaft is..than a solid shaft of same mass, material and len...
Text Solution
|
The bulk modulus for an incompresssible liquid is
Text Solution
|
A copper rod length L and radius r is suspended from the ceiling by on...
Text Solution
|
Which of the folliwing substances has the highest elastictiy
Text Solution
|
When a wire of length 10 m is subjected to a force of 100 N along its ...
Text Solution
|
Two wire A and B of length l, radius r and length 2l, radius 2r having...
Text Solution
|
A cube of side 40 mm has its upper face displaced by 0.1 mm by a tange...
Text Solution
|
A rod of length l and radius r is joined to a rod of length l//2 and r...
Text Solution
|
The Young's modulus of the material of a wire is 2xx10^(10) N m^(-2) I...
Text Solution
|
A weight is suspended from a long metal wire. If the wire suddenly bre...
Text Solution
|
A wire of natural length l, young's modulus Y and area of cross-sectio...
Text Solution
|
When a force is applied on a wire of uniform cross-sectional area 3xx1...
Text Solution
|
If in a wire of Young's modulus Y, longitudinal strain X is produced t...
Text Solution
|