Home
Class 12
PHYSICS
A glass capiliary tube of inner diameter...

A glass capiliary tube of inner diameter 0.28 mm is lowered vertically into water in a vessel. They pressure to be applied on the water in the capillary tube so that water level in the tube is same as that in the vessel in `N//m^(2)` is (surface tension of water = 0.07 `N//m`, atmospheric pressure `= 10^(5) N//m^(2)` and angle of contact `= 0^(@)`)

A

`10^(3)`

B

`99xx10^(3)`

C

`100xx10^(3)`

D

`101xx10^(3)`

Text Solution

Verified by Experts

Promotional Banner

Similar Questions

Explore conceptually related problems

A glass capillary tube of inner diameter 0.28 mm is lowered vertically into water in a vessel. The pressure to be applied on the water in the capillary tube so that water level in the tube is same as the vessel in (N)/(m^(2)) is (surface tension of water =0.07(N)/(m) atmospheric pressure =10^(5)(N)/(m^(2))

A capillary tube of radius 0.50 mm is dipped vertically in a pot of water. Find the difference between the pressure of the water in the tube 5.0 cm below the surface and the atmospheric pressure. Surface tension of water =0.075Nm^-1

Find the pressure inside an air bubble of radius 1 mm at a depth of 20 m in water. (Assume P _ 0 " " 10 ^5 N//m^ 2 , surface tension of water 0.072 N//m )

What should be the pressure inside a small air bubble of 0.1 mm radius situated just below the surface of water? Surface tension of water =72xx10^(-3)N//m and atmospheric pressure =1.013xx10^(5)N//m^(2)

What should be the pressure inside a small air bubble of 0.1mm radius situated just below the water surface. Surface tension of water =7.2xx10^(-2)N//m and atmosphere pressure =1.013xx10^(5)N//m^(2) .

If a capillary tube of radius 1 mm is immersed in water , the mass of water rising in the capillary tube is M . If the radius tube is doubled , then the mass of water , that rises in the capillary tube will be

Calculate the height to which the water will rise in a capillary tube of 1.5 mm diameter (surface tension of water =74 times 10^(-3)Nm^(-1) , angle of contact between water and glass =0^(@) ).

A capillary tube of inside diameter 1mm is dipped vertically into water, so that the length of its part protruding over the water surface is 20mm.What is the radius of curvatur of the meniscus ? Surface tension of water is 72 xx 10^(-3) N//m .

If the surface tension of water is 0.06 N/m, then the capillary rise in a tube of diameter 1mm is (theta=0^(@) )

A capillary tube of radius 0.25 mm is submerged vertically in water so that 25 mm of its length is outside water. The radius of curvature of the meniscus will be (surface tension of water =75xx10^(-3) N/m)