Home
Class 12
PHYSICS
The ratio of secondary to the primary tu...

The ratio of secondary to the primary turns in a transformer is 3:2 . If the power output be P, then the input power neglecting all losses must be equal to

A

5P

B

P

C

1.5P

D

`(2)/(5)`P

Text Solution

Verified by Experts

The correct Answer is:
B
Promotional Banner

Similar Questions

Explore conceptually related problems

The ratio of secondary to the primary turns in a transformer is 3:2 . If the power output be P , then the input power neglecting all loses must be equal to

A step down transformer converts transmission line voltage from 11000 V to 220 V. The primary of the transformer has 6000 turns and efficiency of the transformer is 60%. If the output power is 9 kW, then the input power will be

A thermal power plant produed electric power of 600kW at 4000V, which is to be transported to a place 20 km away form the power plant for consumer's usage. It can be transported either directly with a cable of large current carrying capacity or by sing a combination of step-up and step-down transfprmers at the two ends. THe drawback of the direct transmission is the large energy dissipation. In the method wsing transformers, the dissipatiion is much smaller. In this method a step-up transformers is used at the plant side so that the current is reduced to a smaller value. At the consumers'end, a step-down transformer is used to supply power to the consumers at the specified lower voltage. It is reasonable to assume that the power cable is purely resostive and the transformers are ideal with power factor unity. All the currents and voltagementioned are values. In the method using the transformers assume that the ratio of the number of turns in the primary to that in the secondary in the step-up transformer is 1:10 if the power to the consumers has to be supplied at 200V, the ratio of the number of turns in the primary to that in the secondary in the step-down transformer is

Figure shows an iron-cored transformer assumed to be 100% efficient. The ratio of the secondaty turns to the primary turns is 1:20. A 240 V ac supply is connected to the primary coil and a 6 Omega resistor is connected to the secondary coil. What is the current in the primary coil?

A transformer is a device which increases or decreases alternating voltage through mutual induction. It consists of two coils wound on the same code. One of the coil is connected to input alternating supply. This is called primary coil. The other coil gives the output. i.e. it is connected to external load. This coil is called secondary coil. The alternating emf applied across the primary current causes an alternating current to flow through it. This alternating current creates a continuously changing magnetic flux through the core. The changing magnetic flux is linked with secondary coil. If there is no leakage of flux, then the flux linked per unit turn with primary coil is equal to the flux linked per unit turn with secondary coil. Let phi_(S) is flux linked in secondary coil and phi_(P) is flux linked in primary coil then (phi_(S))/(N_(S))=(phi_(P))/(N_(P)) (where N_(S) and N_(P) are respective number of turns in secondary and primary of transformer) :. (1)/(N_(s))(d phi_(S))/(dt)=(1)/(N_(P))xx(d phi_(P))/(dt) or (1)/(N_(S)) E_(S)=(1)/(N_(P))E_(P) ( :' E = - (d phi)/(dt) = emf in a coil ) If the voltage in secondary is more than that in primary, the transformer is step-up. If voltage in secondary is less than that in primary, the transformer is called step down. Select the correct alternative

A: The power output of a practical transformer is always smaller than the power input. R: A transformer works on the principle of mutual induction.

A step-down transformer has 50 turns on secondary and 1000 turns on primary winding. If a transformer is connected to 220 V, 1A C AC source, then what is output current of the transformer ?

A current of 5A is flowing at 220V in the primary coil of a transformer. If the voltage produced in the secondary coil is 2200V and 50% of power is lost, then the current in the secondary coil will be –

A current of 5A is flowing at 220V in the primary coil of a transformer. If the voltage produced in the secondary coil is 2200V and 50% of power is lost, then the current in the secondary coil will be –

If a transfomer of an audio amplifier has output impedance 8000Omega and the speaker has input impedance of 8Omega , the primary and secondary turns of this transfomer connected between the output of amplifier and to loud speaker should have the ratio