The current in a conductor and the poten...

The current in a conductor and the potential difference across its ends are measured by an ammeter and a voltmeter.The meters draw negligible current.The ammeter is accurate but the vlotmeter has a zero error(that is ,it does not read zero when no potential difference is applied).Calculate the zero error if the readings for two different conditions are 1.75A, 14.4Vand 2.75a, 22.4V.

`0.4 volt`

`0.8 volt`

`-0.4 volt`

`-0.8 volt`

Text Solution

Verified by Experts

The correct Answer is:

Topper's Solved these Questions

CURRENT ELECTRICITY
RESONANCE ENGLISH|Exercise Exercise-1 (Part-3)|2 Videos
CURRENT ELECTRICITY
RESONANCE ENGLISH|Exercise Exercise-2 (Part-1)|24 Videos
CURRENT ELECTRICITY
RESONANCE ENGLISH|Exercise Exercise-1 (Part-1)|41 Videos
COMMUNICATION SYSTEMS
RESONANCE ENGLISH|Exercise Exercise 3|13 Videos
DAILY PRACTICE PROBLEM
RESONANCE ENGLISH|Exercise DPP.No.71|1 Videos

Similar Questions

Explore conceptually related problems

The potential difference across a 4 H inductor vary with time is as shown. The current is Zero at t = 0, Then the current at time t =2s

Three voltmeters all having different resistance, are joined as shown. When some potential difference is applied acros A and B , their readings are V_1,V_2 and V_3. Then

Calculate the potential difference across the ends of a wire of resistance 2 Omega' when a current of 1.5 A passes through it.

The potential difference across a 2-H inductor as a function of time is shown in Fig. At time t = 0, current is zero. Current at t = 1 s is

A resistor of 6 Omega is connected in series with another resistor of 4 Omega . A potential difference of 20 V is applied across the combination. Calculate : the current in the circuit,

The potential difference across a 2-H inductor as a function of time is shown in Fig. At time t = 0 , current is zero. Area under V_(L) - t graph gives

Assertion : If potential difference across two points is zero, current between these two points should be zero. Reason : Current passing from a resistor I=V/R

The potential difference across a 150 mH inductor as a function of time is shown in figure. Assume that the initial value of the current in the inductor is zero. What is the current when t=2.0 ms ? and t = 4.0 ms ?

When a potential difference of 2 volt is applied across the ends of a wire of 5 m length, a current of 1 A flows through it. Calculate : the resistance across the ends of the wire if it is doubled on itself.

Three resistances 2 Omega, 3 Omega and 4 Omega are connected in parallel. The ratio of currents passing through them when a potential difference is applied across its ends will be

RESONANCE ENGLISH-CURRENT ELECTRICITY-Exercise-1 (Part-2)

A wire of resistance 0.1 cm^(-1) bent to form a square ABCD of side 10...
Text Solution
|
In the circuit shown in Fig. 7.39, the heat produced in the 5 Omega re...
Text Solution
|
A 50 W bulb is in series with a room heater and the combination is con...
Text Solution
|
The equivalent resistance between the points A and B is
Text Solution
|
A battery of internal resistance 4 Omega is connected to he network of...
Text Solution
|
In these circuits all the batteries are indentical and have negllgible...
Text Solution
|
Two nonideal batteries are connected in parallel. Consider the followi...
Text Solution
|
Twelve cells each having the same emf are connected in series and are ...
Text Solution
|
Two cells of e.m.f. 10V & 15V are connected in parallel to each other ...
Text Solution
|
N sources of current with different emf's are connected as shown in Fi...
Text Solution
|
The reading of voltmeter is
Text Solution
|
The length of a wire of a potentiometer is 100 cm, and the emf of its ...
Text Solution
|
The current through the ammeter shown in figure is 1 A. If each of the...
Text Solution
|
The ammeter shown in figure consists of a 480 Omega coil connected in ...
Text Solution
|
A galvanometer, together with an unknown resistance in series, is conn...
Text Solution
|
A potentiometer wire of length 100cm has a resistance of 10Omega. It i...
Text Solution
|
The potentiometer wire AB shown in figure is 50cm long.When AD=30cm, n...
Text Solution
|
The current in a conductor and the potential difference across its end...
Text Solution
|
In this given circuit, no current is passing through the galvanometer....
Text Solution
|
In the circuit PneR, the reading of the galvanometer is same with swit...
Text Solution
|