Home
Class 11
PHYSICS
A piece of copper having a rectangular c...

A piece of copper having a rectangular cross-section of `15.2 mm xx 19.1 mm` is pulled in tension with 44,500 N force, producing only elastic deformation. Calculate the resulting strain?

Promotional Banner

Topper's Solved these Questions

  • MECHANICAL PROPERTIES OF FLUIDS

    PSEB|Exercise EXERCISE|46 Videos
  • MOTION IN A PLANE

    PSEB|Exercise Exercise|55 Videos

Similar Questions

Explore conceptually related problems

A wire with an area of cross-section as 10 mm^2 has a resistance of 5Omega , when a potential difference across its ends is 25V. Calculate the drift velocity of electrons. Given the number density of electrons as 5 xx 10^20 electrons per cubic meter ( e//m^-3 )

A steel wire of mass mu per unit length with a circular cross section has a radius of 0.1 cm. The wire is of length 10 m when measured lying horizontal, and hangs from a hook on the wall. A mass of 25 kg is hung from the free end of the wire. Assuming the wire to be uniform and lateral strains < < longitudinal strains, find the extension in the length of the wire. The density of steel is 7860 kg m^-3 (Young's modulues Y = 2 xx 10^11 N m^-2)

A current of 2.4 A flows through a wire of cross-sectional area 1.5 mm^2 . Find the current density in the wire. If the wire contains 8 xx 10^28m^-3 elecrtrons per unit volume calculate the average relaxation on time. Given that charge on electron = 1.6 xx 10^-19C and mass of electron =9.1 xx 10^-31 kg.

A wire with an area of cross-section as 1 mm2 has a resistance of 10Q, when a potential difference across its ends is 8V. Calculate the drift velocity of electrons. Given,number density of electrons in wire as 8 xx 10^20 electrons per cubic meter.

A uniform copper wire of mass 2.23xx10^(-3) kg carries a current of 1 A when 1.7 V is applied across it. Calculate its length and area of cross-section. If the wire is uniformly stretched to double its length, calculate the new resistance. Density of copper is 8.92xx10^(3) kg m^(-3) and resistivity is 1.7xx10^(-8) Omega m.

Find the resistance of a copper wire of length 1m and area of cross-section 2mm ^(2) .The specific resistance of copper= 1.7xx10^(-8)Ohm-m .

A copper wire of resistivity 1.6xx10^-8 ohm-m has a cross sectional area of 20xx10^-4 cm^2 . Calculate the length of wire required to make a 10 ohm coil.

A current of 1 A flows through a wire of length 0.24m and area of cross-section 1.2mm^2 , when it is conneted to a battery of 3V. Find the number density of free electrons in the wire, if the electron mobility is 4.8 xx 10^-6 m^2 V^-1s^-1 , given that charge on electron = 1.6 xx 10^-19C

The cylindrical tube of a spray pump has a cross-section of 8.0 cm^2 one end of which has 40 fine holes each of diameter 1.0 mm. If the liquid flow inside the tube is 1.5 m min^-1 , what is the speed of ejection of the liquid through the holes ?

PSEB-MECHANICAL PROPERTIES OF SOLID-EXERCISE
  1. The stress-strain graphs for materials A and B are shown in Fig. 9.12....

    Text Solution

    |

  2. Read the following two statements below carefully and state, with reas...

    Text Solution

    |

  3. Read the following two statements below carefully and state, with reas...

    Text Solution

    |

  4. Two wires of diameter 0.25 cm, one made of steel and the other made of...

    Text Solution

    |

  5. The edge of an aluminium cube is 10 cm long. One face of the cube isfi...

    Text Solution

    |

  6. Four identical hollow cylindrical columns of mild steel support a big ...

    Text Solution

    |

  7. A piece of copper having a rectangular cross-section of 15.2 mm xx 19....

    Text Solution

    |

  8. A steel cable with a radius of 1.5 cm supports a chairlift at a ski ar...

    Text Solution

    |

  9. A rigid bar of mass 15 kg is supported symmetrically by three wires ea...

    Text Solution

    |

  10. A 14.5 kg mass, fastened to the end of a steel wire of unstretched len...

    Text Solution

    |

  11. Compute the bulk modulus of water from the following data: Initial vol...

    Text Solution

    |

  12. What is the density of water at a depth where pressure is 80.0 atm, gi...

    Text Solution

    |

  13. Compute the fractional change in volume of a glassslab, when subjected...

    Text Solution

    |

  14. Determine the volume contraction of a solid copper cube, 10 cm on an e...

    Text Solution

    |

  15. How much should the pressure on a litre of water be changed to compres...

    Text Solution

    |

  16. Anvils made of single crystals of diamond, with the shape as shown in ...

    Text Solution

    |

  17. A rod of length 1.05 m having negligible mass is supported at its ends...

    Text Solution

    |

  18. A rod of length 1.05 m having negligible mass is supported at its ends...

    Text Solution

    |

  19. Two strips of metal are riveted together at their ends by four rivets,...

    Text Solution

    |

  20. The Marina trench is located in the Pacific Ocean, and at one place it...

    Text Solution

    |