Home
Class 12
PHYSICS
A screw gauge with a pitch of 0.5 mm and...

A screw gauge with a pitch of 0.5 mm and a circular scale with 50 divisions is used to measure the thickness of a thin sheet of Aluminium. Before starting the measurement, it is found that when the two jaws of the screw gauge are brought in contact, the `45^(th)` division coincides with the main scale line and that the zero of the main scale is barely visible. What is the thickness of the sheet if the main scale reading is 0.5 mm and the `25^(th)` division coincides with the main scale line ?

A

0.70 mm

B

0.50 mm

C

0.75 mm

D

0.80 mm

Text Solution

Verified by Experts

The correct Answer is:
D
Promotional Banner

Similar Questions

Explore conceptually related problems

A screw gauge with a pitch of 0.5 mm and a circular scale with 50 division is used to measure the thickness of a thin sheet of aluminium. Before starting the measurement, it is found that when the two jaws of the screw are brought in constant, 45th division coincides with the main scale line and that the zero of main scale line and that the zero of main scale is barely visible. What is the thickness of the sheet, if the main scale reading is 0.5 mm and 25th division coincides with the main scalel line ?

Least count of a vernier callipers is 0.01 cm. When the two jaws are in touch with each other, the 5^(th) division of vernier scale coinciding with the main scale lies to the left of the zero of the main scale. Further more, while measuring the diameter of the sphere, the zero mark of the vernier lies in between 2.4 cm and 2.5 cm and ther 6^(th) vernier division coincides with a main scale division.

The pitch of a screw gauge is 0.5m and there are 50 divisins on its circular scale and one man scale division =0.5mm . Before starting the measurement, it is found that when jaws of the screw gauge are brought in contact, the zero of the circular scale lies 5 divisions above the reference line. When a metallic wire is placed betwen the jaws, four main scale divisions are clearly visible and 16^(th) division on the circular scale coincides with the reference line. The diameter of the wire is

A screw gauge has least count of 0.01 mm and there are 50 divisions in its circular scale: The pitch of the screw gauge is:

screw gauge of pitch 0.1 cm and 50 divison on circular scale measure thickness of object which of following measurement is possible for thickness

The circular scale of a micrometer has 200 divisions and pitch of 2 mm . Find the measured value of thickness of a thin sheet. .

A screw gauge with a pitch of 1 mm has 100 divisions on its circular scale. What it is used to measure the diameter of a thin wire, the main scale reading is 3 mm and the circular scale reading is 45. If D is the diameter of the wire in mm, then find the value of D.

The main scale of a vernier calliper reads in mm and its vernier scale is divided into 8 divisions, which coincides with 7 divisions of the main scale. It was also observed that, when the two jaws are brought in contact, the zero of the vernier scale coincided with the zero of the main scale. The edge length of a cube is measured using this vernier calliper. The main scale reads 12 mm and 2^("nd") division of the vernier scale coincides with the main scale. The edge length (in mm) of the cube is

If 25venier scale divisions coincide with 20 main scale divisions. Find least count of venier calliper. ( One main scale division = 1mm )

If 25venier scale divisions coincide with 20 main scale divisions. Find least count of venier calliper. ( One main scale division = 1mm )