Home
Class 12
PHYSICS
A sound absorber attenuates the sound le...

A sound absorber attenuates the sound level by 20 dB. The intensity decreases by a factor of :

A

100

B

1000

C

10000

D

10

Text Solution

Verified by Experts

The correct Answer is:
A
Promotional Banner

Similar Questions

Explore conceptually related problems

When a person wears a hearing aid, the sound intensity level increases by 30 dB. The sound intensity increases by

Day time sound level in silent zone is

Two sounds in a gas differ in their loudness level by 20 db. What is the ratio of the amplitudes of the pressure oscillations ?

A firework charge is detonated many metres above the ground. At a distance of 400 m from the explosion, the acoustic pressure reaches a maximum of 10.0(N)/(m^2) . Assume that the speed of sound is constant at 343 (m)/(s) throughout the atmosphere over the region considered, the ground absorbs all the sound falling on it, and the air absorbs sound energy at the rate of 7.00 (dB)/(km) . What is the sound level (in decibels) at 4.00 km from the explosion?

Due to point isotropic sound source, the intensity at a point is observed as 40 dB. The density of air is rho=((15)/(11))(kg)/(m^3) and velocity of sound in air is 330(m)/(s) . Based on this information answer the following questions. Q. The ratio of displacement amplitude of wave at observation point to wavelength of sound waves is

(a) What is the intensity of a 60 dB sound ? (b) If the sound level is 60 dB close to a speaker that has an area of 120 cm ^(2) . What is the acoustic power output of the speaker?

(i) The intensity of a light pulse travelling along a communication channel decreases exponentially with distance x according to the relation I = I_0 e^(-alphax) , where I_0 is the intensity at x = 0 and alpha is the attenuation constant. Show that the intensity reduces by 75 percent after a distance of (ln 4)/(alpha) (ii) Attenuation of a signal can be expressed in decibel (dB) according to the relation dB = 10log_10 (I//I_0). What is the attenuation in dB//km for an optical fibre in which the intensity falls by 50 percent over a distance of 50 km?

Name the unit used for measuring the sound level.

If the intensity of sound increased by a factor of 20 then the sound level increases in decibels by the

Most people interpret a 9.0 dB increase in sound intensity level as a doubling in loudness. By what factor must the sound intensity be increase to double the loudness?