Home
Class 12
PHYSICS
For what value of R, (in ohm) the curren...

For what value of R, (in ohm) the current in galvanometer is zero?

A

`5Omega`

B

`2Omega`

C

`7Omega`

D

`1Omega`

Text Solution

Verified by Experts

The correct Answer is:
D
Promotional Banner

Similar Questions

Explore conceptually related problems

What should be the value of R in figure fo which the current in it is zero?

All the resistance in the given Wheatstone bridge have different values and the current through the galvanometer is zero. The current through the galvanometer will still be zero if,

In a balanced wheat stone bridge, current in the galvanometer is zero. If remains zero when- (1) battery emf is increased (2) all resistance are increased by 10 ohms (3) all resistance are made five times (4) the battery and the galvanometer are intercharged

For the circuit shown figure answer the following questions For what value of R, current through 7V battery is zero?

For what value of R in the circuit as shown, current passing through 4 Omega resistance will be zero

The wire AB of a meter bridge changes linearly form radius r to 2r from left end to right end. Where should the free end of the galvanometer be connected on AB so that the deflection in the galvanometer is zero?

In the following circuit a 10 m long potentiometer wire with resistance 1.2 ohm/m, a resistance and an accumulator of emf 2V are connected in series. When the emf of thermocouple is 2.4 mV then the deflection in galvanometer is zero. The current supplied by the accumulator will be:

When a galvanometer is shunted with a 4 Omega resistance, the deflection is reduced to one-fifth. If the galvanometer is further shunted with a 2 Omega wire, determine current in galvanometer now if initially current in galvanometer is I_(0) (given main current remains same).

In the circuit shown , the value of R in ohm that will result in no current through the 30 V battery is

Consider the potentiometer circuit arranged as in figure. The potentiometer wire is 600cm long. At what distance from the point A should the jockey touch the wire to get zero deflection in the galvanometer? b) If the jockey touches the wire at a distance of 560cm from A, What will be the current in the galvanometer?