Home
Class 12
CHEMISTRY
Axles are made by heating rods of iron e...

Axles are made by heating rods of iron embedded in charcoal powder. The process is known as :

A

Case hardening

B

Sheradizing

C

Annealing

D

Tempering

Text Solution

Verified by Experts

The correct Answer is:
A
Promotional Banner

Similar Questions

Explore conceptually related problems

Railway wagon axles are made by heating rods of iron embedded in charcoal powerder. The process is known as

The process of heating the ore in the absence of oxygen is known as .....

When limestone is heated strongly, it gives off CO_(2) . In matallurgy this process is known as

A solenoid 30 cm long is made by winding 2000 loops of wire on an iron rod whose cross-section is 1.5cm^(2) . If the relative permeability of the iron is 600. what is the self-inductance of the solenoid?

The process of heating the ore strongly in excess of air so that the volatile impurities are removed and the ore is changed to oxide is known as

A process in which the system does not exchange heat with the surroundings is known as

Explain the heating of an iron rod by conduction on the basis of kinetic model.

Sodium metal can be extracted by either Castner's Process or Down's process Castner's process. Electrolyte to fused NaOH Cathode and anode are made up of a steel rod and Ni cylinder respectively the reaction takes place as follows : At cathode Na^(+)+e^(-)toNa At anode OH^(-)to(1)/(2)H_(2)O+(1)/(4)O_(2)uarr+e^(-) Down's process : Electrolyte to fused NaCl and CaCl_(2) Cathode and anode are ring shaped iron metal and graphite respectively. The reaction takes place as follows : Na^(+)+e^(-)toNa Cl^(-)to(1)/(2)Cl_(2)uarr+e^(-) CaCl_(2) is used along with NaCl due to

Gibbs Helmholtz equation relates the enthalpy, entropy and free energy change of the process at constant pressure and temperature as DeltaG=DeltaH-TDeltaS " (at constant P, T)" In General the magnitude of DeltaH does not change much with the change in temperature but the terms TDeltaS changes appreciably. Hence in some process spontaneity is very much dependent on temperature and such processes are generally known as entropy driven process. When CaCO_(3) is heated to a high temperature it decomposes into CaO and CO_(2) , however it is quite stable at room temperature. It can be explained by the fact that

shows a circular wheel of radius 10.0 cm whose upper half, shown dark in the figure, is made of iron and the lower half of wood. The two junctions are joinded by an iron rod. A uniform magnetic field B of magnitdue 2.00X 10^(-4) T exists in the space above the central line as suggested by the figure. The wheel is set into pure rolling on the horizontal surface. The wheel is set into pure rolling on the horizontal surface. If it takes 2.00 seconds for the iron part to come down and the wooden part to go up, find the average emf induced during this period.