Home
Class 12
PHYSICS
Calculate the radius of capillary tube i...

Calculate the radius of capillary tube if water rise to a height 4.5 cm . Surface tension of water is `72 `dyne` /cm`.

Promotional Banner

Similar Questions

Explore conceptually related problems

A capillary tube of uniform bore is dipped vertically in water which rises by 6 cm in the tube. Find the radius of the capillary tube if the surface tension of water is 72 dyne/cm (g= 980 cm//s^2 ).

Calculate the work done in increasing the radius of a soap bubble in air from 2 cm to 3 cm. The surface tension of soap solution is 25 dyne/cm.

A capillary tube with very thin walls is attached to the beam of a balance which is then equalized. The lower end of the capillry is brought in contact with the surface of water after which an additional load of P = 0.135 gm force is needed to regain equilibrium. If the radius of the capillary is (lambda)/(10)cm then find lambda The surface tension of water is 70 "dyne"//"cm" . (g = 9.8 m//s^(2))

A square glass plate 4.5 cm long and 0.5 cm thick is suspended in a through containing water so that its length just touches the water surface, calculate the downward force due to surface tension acting on the plate. (Surface tension of water = 70 dyne/cm)

A beaker of radius 10 cm is filled with water.Calculate the force of surface tension on any diametrical line on its surface. Surface tension of water is 0.075N/m.

Calculate the work done in increasing the radius of a soap bubble in air from 1 cm to 2 cm. The surface tension of soap solution is 30 dyne/cm . (pi = 3.142)

A beaker of radius 10 cm is filled with water. Calculate the force of surface tension on any diametrical line on its surface. Surface tension of water is 0.075 N//m .

One end of a glass capillary tube with a radius r is immersed into water to a depth of h The surface tension of water is s and atmospheric pressure is p_0 . What pressure is required to blow an air bubble out of the lower end of the tube? Density of water is rho

A capillary tube of uniform bore is dipped vertically in water which rises by 7 cm in the tube. Find the radius of the capillary if the surface tension of water is 70dy//cm .