What happens if the galvanometer and cell are interchanged at the balance point of the bridge? Would the galvanometer show current?

In a metre bridge, the balance point is found to be at 39.5 cm from the end A, when the resistor Y is of 12.5 Omega . Determine the resistance of X. Made of thick copper strips? Determine the balance point of the bridge above if X and Y are interchanged. What happens if the galvanometer and cell are interchanged at the balance point of the bridge ? Would the galvanometer show any current?

What is a galvanometer?

what is a dead beat galvanometer?

What is the purpose of using soft iron core in galvanometer.

In comparing the resistance of two cells P and Q with a sides wire bridge, a balance point is obtained when the sliding contact is 30 cm from the zero end of the wire. The resistances P and Q are interchanged and the balance is obtained at 120 cm from the same emf. Find the ratio of the resistance P and Q and the length of the bridge wire

When primary coil P is moved towards secondary coil S (as shown in the Fig.) the galvanometer shows momentary deflection. What can be done to have larger deflection in the galvanometer with the same battery?

What is the condition for balance of a Wheatstone bridge?