The amplifiers X, Y and Z are connected in series. If the voltage gains of X, Y and Z are 10, 20 and 30, respectively and the input signal is 1 mV peak value, then what is the output signal voltage (peak value)
if d.c. supply voltage is 5V?

The amplifiers X, Y and Z are connected in series. If the voltage gains of X, Y and Z are 10, 20 and 30, respectively and the input signal is 1 mV peak value, then what is the output signal voltage (peak value) if d.c. supply voltage is 10V?

Two amplifiers are connected one after the other in series (cascaded).The first amplifier has a voltage gain of 10 and the second has a voltage gain of 20. If the input signal is 0.01 volt, calculate the tput ac signal.

Two amplifiers having voltage gains 20 and 50 are connected as shown in the figure. If the initial input voltage is 25 mV, find the final output voltage obtained.

In a common emitter amplifier, using output reisistance of 5000 ohm and input resistance fo 2000ohm, if the peak value of input signal voltage is 10 m V and beta=50, then the peak value of output voltage ?

Trune ratio in a step up trnsfromer is 1:2, if a Lechlanche cell of 1.5 V is conneted across the input, what is the voltage across the output?

Two cells X an Y are connected to a resistance of 10 Omega as shown in figure. The terminal voltage of cell Y is:

A 2 mu F capacitor 100 ohm resistor and 8 H inductor are connected in series with an a.c. source. What should be the frequency of soure for which the current drawn in the circuit is maximum? If peak value of emf of the source is 200 V, peak value of current in the circuit.