Home
Class 11
PHYSICS
When composite rod is free, then composi...


When composite rod is free, then composite length increases to 2.002 m for temperature `20^(@)C` to `120^(@)C` when composite rod is fixed between the support there is no change in component length find y and `alpha` of steel, if `y_(c)=1.5xx10^(13)N//m^(2)alpha_(c)=1.6xx10^(-5)//.^(@)C`.

Text Solution

Verified by Experts

`Deltal=l_(S)alpha_(S)DeltaT+l_(C)alpha_(C)DeltaTimplies0.002=[1.5alpha_(S)+0.5xx1.6xx10^(-5)]xx100`
`impliesalpha_(S)=(1.2xx10^(-5))/(1.5)=8xx10^(-6)// .^(@)C`
there is no change in compoenent length
Promotional Banner

Topper's Solved these Questions

  • ELASTICITY, SURFACE TENSION AND FLUID MECHANICS

    ALLEN |Exercise Exercise 1 (Elasticity)|16 Videos

  • ELASTICITY, SURFACE TENSION AND FLUID MECHANICS

    ALLEN |Exercise Exercise 1 (Surface Tension)|21 Videos

  • CENTRE OF MASS

    ALLEN |Exercise EXERCISE-V B|19 Videos

  • ERROR AND MEASUREMENT

    ALLEN |Exercise Part-2(Exercise-2)(B)|22 Videos

Similar Questions

Explore conceptually related problems

A steel wire of length 1 m and mass 0.1 kg and having a uniform cross-sectional area of 10^(-6) m^(2) is rigidly fixed at both ends. The temperature of the wire is lowered by 20^(@)C . If the wire is vibrating in fundamental mode, find the frequency (in Hz). (Y_(steel)=2xx 10^(11) N//m^(2),alpha_(steel)=1.21 xx 10^(-5)//.^(@)C) .

A fine steel wire of length 4 m is fixed rigidly in a heavy brass frame as ashown in figure . It is just taut at 20^(@)C . The tensile stress developed in steel wire it whole system is heated to 120^(@)C is :- ( Given alpha _("brass") = 1.8 xx 10^(-5) .^(@)C^(-1), alpha_("steel") = 1.2 xx 10^(-5) .^(@)C, Y_("steel") = 2 xx 10^(11) Nm^(-2), Y_("brass")= 1.7xx10^(7) Nm^(-2) )

A steel rod of length 1 m and area of cross section 1 cm^(2) is heated from 0^(@)C to 200^(@)C without being allowed to extend or bend. Find the tension produced in the rod (Y=2.0 xx 10 ^(11) Nm ^(-1) , alpha = 10 ^(-5) ^(@)C ^(-1))

A copper rod of 88cm and an aluminimum rod of unknown length have their increase in length independent of increase in temperature. The length of aluminium rod is: (alpha_(Cu) =1.7 xx 10^(-5) K^(-1) and alpha_(Al)= 2.2 xx 10^(-5) K^(-1))

Two fines steel wires , fastened between the projectors of a heavy brass bar, are just taut when the whole system is at 0^(@)C . What is the tensile stress in the steel wires the temperature of the system is raised by 200^(@)C ? ( alpha_("glass") = 2 xx 10^(-5) ^(@)C ^(-1), alpha_("steel") = 1.2 xx 10^(-5)"^(@)C^(-1), Y_("steel") = 200GNm^(-2) )

A brass rod of length 50 cm and diameter 3.0 mm is joined to a steel rod of the same length and diameter. What is the change in length of the combined rod at 250^(@)C , if the original lengths are at 40.0^(@)C ? there a 'thermal stress' developed at the junction ? The ends of the rod are free to expand (Coefficient of linear expansion of brass =2.0xx10^(-5)K^(-1)," steel "=1.2xx10^(-5)K^(-1) ).

What is the temperature of the steel-copper junction is the steady state of the system shown in figure. Length of the steel rod = 15.0 cm, length of the copper rod = 10.0 cm, temperature of the furnace =300^(@)C , temperature of the other end =0^(@)C . The area of cross section of the steel rod is twice that of the copper rod. (Thermal conductivity of steel =50.2" Js"^(-1)m^(-1)K^(-1) , and copper =385" Js"^(-1)m^(-1)KJ^(-1) ).

Value of temperature gradient is 80^(@) C/m on a rod of 0.5 m length. Temperature of hot end is 30^(@)C , then what is the temperature of cold end ?

At 20^(@)C a liquid is filled upto 10 cm height in a container of glass of length 20 cm and cross-sectional area 100 cm^(2) . Scale is marked on the surface of container. This scale gives correct reading at 20^(@)C . Given gamma_(L) = 5 xx 10 ^(-5) k^(-1) , alpha^(g) = 1 xx 10^(-5) "^(@)C^(-1) The actual height of liquid at 40^(@)C is -

At 20^(@)C a liquid is filled upto 10 cm height in a container of glass of length 20 cm and cross-sectional area 100 cm^(2) . Scale is marked on the surface of container. This scale gives correct reading at 20^(@)C . Given gamma_(L) = 5 xx 10 ^(-5) k^(-1) , alpha^(g) = 1 xx 10^(-5) "^(@)C^(-1) The actual volume of liquid at 40^(@)C is -