Home
Class 11
PHYSICS
The circular scale of a micrometer has 2...

The circular scale of a micrometer has `200` divisions and pitch of `2 mm`. Find the measured value of thickness of a thin sheet.
.

A

`3.41 mm`

B

`6.41 mm`

C

`3.46 mm`

D

`3.51 mm`

Text Solution

Verified by Experts

The correct Answer is:
B
Least count `= ("pitch")/("No. of divisions")=(2)/(200)=0.01mm`, Reading `= 3 xx 2+(46-5)(0.01)=4.41mm`.
Promotional Banner

Topper's Solved these Questions

  • ERROR AND MEASUREMENT

    ALLEN |Exercise Part-2(Exercise-1)|51 Videos

  • ERROR AND MEASUREMENT

    ALLEN |Exercise Part-2(Exercise-2)(A)|16 Videos

  • ELASTICITY, SURFACE TENSION AND FLUID MECHANICS

    ALLEN |Exercise Exercise 5 B (Integer Type Questions)|3 Videos

  • KINEMATICS

    ALLEN |Exercise EXERCISE-2|89 Videos

Similar Questions

Explore conceptually related problems

The circular scale of a screw gauge has 50 divisions and pitch of 0.5 mm. Find the diameter of sphere. Main scale reading is 2 -

A screw gauge with a pitch of 0.5 mm and a circular scale with 50 divisions is used to measure the thickness of a thin sheet of Aluminium. Before starting the measurement, it is found that when the two laws of the screw gauge are brought in contact, the 45^(th) division coincides with the main scale is barely visible. What is the thickness of the sheet is the main scale reading is 0.5 mm and the 25^(th) division coincides with the main scale line ?

A screw gauge with a pitch of 0.5 mm and a circular scale with 50 division is used to measure the thickness of a thin sheet of aluminium. Before starting the measurement, it is found that when the two jaws of the screw are brought in constant, 45th division coincides with the main scale line and that the zero of main scale line and that the zero of main scale is barely visible. What is the thickness of the sheet, if the main scale reading is 0.5 mm and 25th division coincides with the main scalel line ?

The vernier scale of a travelling microscope has 50 divisions which coincide with 49 main scale divisions. If each main scale division is 0.5 mm, calculate the minimum inaccuracy in the measurement of distance.

Two full turns of the circular scale of a screw gauge cover a distance of 1mm on its main scale. The total number of divisions on the circular scale is 50 . Further, it is found that the screw gauge has a zero error of - 0.03mm . While main scale reading of 3mm and the number of circular scale divisions in line with the main scale as 35 . the dimeter of the wire is

Internal micrometer is a measuring intrument used to measure internal diameter (ID) of a large cylinder bore with high accuracy. Construction is shown in figure. There is one fixed rod B (to the right in figure) and one moved rod A (to the left in figure). It is based on the particle of advancement of a screw when it is rotated in a nut with internal threads. Main scale reading can be directly seen on the hub which is fixed with respect to rod B. When the cap is rotated rod A moves in or cut depending on direction of rotation. The circular scale reading is seen by checking which division of circular scale coincide with the references line This is to be multiplied by LC to get circular scale reading. Least count = value of 1 circular scale division = ("pitch")/("number of division on circular scale") Length of rod A is chosen to match the ID(PQ) to be measured. Zero error is checked by taking reading between standard blocks fixed at normal value of ID to be measured. Zero error is positive if cap end is one the right of the main scale and negative it is on the left side. In an internal micrometer, main scale division is of 0.5 mm and there are 50 divisions in circular scale. The least count of the instrument is-

The pitch of a screw gauge is 1 mm and there are 100 division on the circular scale. While measuring the diameter of a wire, the linear scale reads 1mm and 47th division on circular scale coincides with the reference line. The length of the wire is 5.6 cm. Find the curved surface area (in cm^2) of the wire in proper significant figures.

The vernier of a circular scale is divided into 30 divisons, which coincides with 29 main scale divisions. If each main scale division is (1//2)^@ the least count of the instrument is (1^@=60')

The pitch of a screw gauge is 1 mm and there are 50 divisions on its cap. When nothing is put in between the studs, 44th divisions of the circular scale coincides with the reference line and the line and the zero of the main scale is not visible or zero of circular scale is lying above the reference line. When a glass plate is placed between the studs, the main scale reads three divisions and the circular scale reads 26 divisions. Calculate the thickness of the plate.

A screw gauge gives the following reading when used to measure the diameter of a wire. Main scale reading =0mm , circular scale reading =52 divisions. Given that 1mm on main scale corresponds to 100 divisions of the circular scale. The diameter of the wire from the above data is

ALLEN -ERROR AND MEASUREMENT-Part-2(Exercise-2)(B)
  1. The circular scale of a micrometer has 200 divisions and pitch of 2 mm...

    Text Solution

    |

  2. A cube has a side of length 1.2 xx 10^(-2)m. Calculate its volume.

    Text Solution

    |

  3. A wire has a mass (0.3+-0.003)g, radius (0.5+-0.005)mm and length (6+-...

    Text Solution

    |

  4. For the post office arrangement to determine the value of unknown resi...

    Text Solution

    |

  5. If in an experiment for determination of velocity of sound by resonanc...

    Text Solution

    |

  6. Graph of position of image vs position of point object from a convex l...

    Text Solution

    |

  7. A student performs an experiment for determination of g [ = ( 4 pi^(2...

    Text Solution

    |

  8. The circular scale of a screw gauge has 50 divisions and pitch of 0.5 ...

    Text Solution

    |

  9. A student performs an experiment to determine the Young's modulus of a...

    Text Solution

    |

  10. In the experiment to determine the speed of sound using a resonance co...

    Text Solution

    |

  11. In an experiment to determine the focal length (f) of a concave mirror...

    Text Solution

    |

  12. The diameter of a cylinder is measured using a vernier callipers with ...

    Text Solution

    |

  13. Using the expression 2d sin theta = lambda, one calculates the values ...

    Text Solution

    |

  14. During an experiment with a metre bridge, the galvanometer shows a nul...

    Text Solution

    |

  15. A student performed the experiment of determination of focal length of...

    Text Solution

    |

  16. A student performed the experiment to measure the speed of sound in ai...

    Text Solution

    |

  17. Consider a Vernier callipers in which each 1cm on the main scale is di...

    Text Solution

    |

  18. In a vernier callipers, n divisions of its main scale match with (n+1)...

    Text Solution

    |

  19. In searle's experiment, the diameter of the wire, as measured by a scr...

    Text Solution

    |

  20. Draw the circuit for experimental verification of Ohm's law using a so...

    Text Solution

    |

  21. The pitch of a screw gauge is 1 mm and there are 100 division on the c...

    Text Solution

    |