An audio signal consists of two distinct...

An audio signal consists of two distinct sound. One a human speech signal in the frequency band of `200Hz` to `2700Hz`, while the other is a high frequency music signal in the frequency band of `10200Hz` to `15200Hz`. The ratio of the AM signal together to the AM signal band width required to send just the human speech is:

Text Solution

Verified by Experts

The correct Answer is:

Topper's Solved these Questions

SEMICONDUCTORS
ALLEN |Exercise Part-3(Exercise-3)|27 Videos
PHYSICAL WORLD, UNITS AND DIMENSIONS & ERRORS IN MEASUREMENT
ALLEN |Exercise EXERCISE-IV|7 Videos
WAVES AND OSCILLATIONS
ALLEN |Exercise Part-1(Exercise-05)[B]|42 Videos

Similar Questions

Explore conceptually related problems

Two audio speakers are kept some distance apart and are driven by the same amplifier system. A person is sitting at a place 6.0 m from one of the speakers and 6.4 m from the other. If the sound signal is continuously varied from 500 Hz to 5000 Hz, what are the frequencies for which there is a destructive interference at the place of the listener? Speed of sound in air = 320 ms^-1

A train standing at the outer signal of a railway station blows a whistle of frequency 400Hz in still air. (i) What is the frequency of the whistle for a platform observer when the train (a) approaches the platform with a speed of 10 ms^(-1) . (b) recedes from the platform with a speed of 10ms^(-1) ? (ii) What is the speed of sound in each case? The speed of sound in still air can be taken as 340ms^(-1) .

Two radio stations broadcast their programmes at the same amplitude A and at slightly different frequencies omega_(1) and omega_(2) respectively, where omega_(1) - omega_(2) = 10^(3) Hz . A detector receives the signals from the two stations simultaneously, it can only detect signals of intensity ge 2A^(2) . (i) Find the time interval between successive maxima of the intensity of the signal received by the detector. (ii) Find the time for which the detector remains idle in each cycle of the intensity of the signal.

A bat moving at 1 0 ms^(-1) towards a wall sends a sound signal of 8000 Hz towards it. On reflection it hears a sound of frequency f. The value of g in Hz is close to (speed to sound = 320 ms^(-1) ) :-

ALLEN -SEMICONDUCTORS-Part-3(Exercise-4)

Truth table for system of four NAND gates as shown in figure is : .
Text Solution
|
A diode detector is used to detect an amplitude modulated wave of 60% ...
Text Solution
|
The I- V characteristic of on LED is
Text Solution
|
The forward biased diode connection is
Text Solution
|
A single of 5 kHz frequency is amplitude modulated on a carrier wave o...
Text Solution
|
In an unbiased p-n junction electrons diffuse from n-region to p-regio...
Text Solution
|
A 2V battery is connected across AB as shown in the figure. The value ...
Text Solution
|
The value of the resistor, R(S), needed in the dc voltage regulator ci...
Text Solution
|
Choose the correct statement.
Text Solution
|
For common emitter configuration, if alpha and beta have their usual m...
Text Solution
|
if a,b,c,dare inputs to a gate and x is its output , then as per the f...
Text Solution
|
The temperature dependence of resistances of Cu and undoped Si in the ...
Text Solution
|
An audio signal consists of two distinct sound. One a human speech sig...
Text Solution
|
An unknown transistor needs to be identified as npn and pnp type. A mu...
Text Solution
|
An experiment is preformed to determine the I-V characteristics of a Z...
Text Solution
|
The truth table given below belongs for which gates {:(A,B,Y),(0,0,0...
Text Solution
|
A modulated signal Cm(t) has the form Cm(t) = 30 sin 300pi t + 20 (cos...
Text Solution
|
The ratio (R) of output resistance r0 and the input resistance r, in m...
Text Solution
|
To get an output 1, the input ABC should be :-
Text Solution
|
A realistic graph depiciting the variation of thhe reciprocal of input...
Text Solution
|