Home
Class 11
CHEMISTRY
A manometer is connected to a gas contai...

A manometer is connected to a gas containing bulb The open arm reads `43.7 cm` where as the arm connected to the bulb reads `15.6 cm` If the barometric pressure is 743mm mercury What is the pressure of gas in bar ? .

Text Solution

AI Generated Solution

To find the pressure of the gas in bar using the manometer readings and the barometric pressure, we can follow these steps: ### Step 1: Calculate the difference in mercury levels. The difference in height between the two arms of the manometer is given by: \[ \text{Difference} = \text{Height of open arm} - \text{Height of gas arm} \] ...
Promotional Banner

Similar Questions

Explore conceptually related problems

A manometer is connected to a gas containing bulb. The open arm reads 40.0 cm where as the arm connected to the bulb reads 15.0 cm . If barometric pressure is 74.0 cm Hg , then what is the pressure of gas in bar?

A gas is filled into a bulb connected to an open limb manometer. The level of mercury in the open arm is 2.1 cm lower than that in the other arm of the manometer. The atmospheric pressure is 740 mm. What is the pressure of the gas?

The manometer has a water column difference of 50 cm . If the atmospheric pressure is 10^(5) Pa, find the pressure of the gas in the container .

The difference in the heights of mercury levels in an open end manometer connected to a gas chamber is found to be 175 mm. If the height of mercury level in the smaller limb is more as compared to that in the longer limb and the atmospheric pressure is 755 mm, what is the pressure of the gas ?

A faulty barometer contains certains amount of air and saturated water vapour . It reads 74.0cm when the atmospheric pressure is 76.0cm of mercury and reads 72.10cm when the atmospheric pressure is 74.0cm of mercury.Saturation vapour pressure at air temperature =1.0cm of mercury. Find the length of the baromerer tube above the mercury level in the reservoir.

A manometer reads the pressure of a gas in a enclosure as shown in figure(a) When some of the gas is removed by a pump, the manometer reads as in (b). The liquid used in the manometers is mercury and the atmospheric pressure is 76 cm of mercury. (i) Give the absolute and gauge pressure of the gas in the enclosure for cases (a) and (b) in units of cm of mercury . (ii) How would the level change in case (b) if 13.6 cm of water are poured into the right limb of the manometer?

A manometer reads the pressure of a gas in a enclosure as shown in figure(a) When some of the gas is removed by a pump, the manometer reads as in (b). The liquid used in the manometers is mercury and the atmospheric pressure is 76 cm of mercury. (i) Give the absolute and gauge pressure of the gas in the enclosure for cases (a) and (b) in units of cm of mercury . (ii) How would the level change in case (b) if 13.6 cm of water are poured into the right limb of the manometer?

The difference in the heights of mercury columns in a closed end manometer connected to a gas container is found to be 15 cm. What is the pressure of the gas in terms of Pa ?

Two discharge tubes have identical material structure and the same gas is filled in them. The length of one tube is 10cm and that of th other tube is 20cm. Sparking starts in both the tubes when the potential difference between the cathode and the anode is 100 V . If the pressure in the shorter tube is 1.0 mm of mercury, what is the pressure in the longer tube?