A Zener diode is specified as having a b...

A Zener diode is specified as having a breakdown voltage of 9.1 V,with a maximum power dissipation of 364 mW. What is the maximum current the diode can handle?

Text Solution

Verified by Experts

Maximum current that the given diode can handle is `(364xx10^(-3))/(9.1)A` i.e. 40 mA.

Topper's Solved these Questions

WAVES AND OSCILLATIONS
ALLEN|Exercise Part-1(Exercise-01)|53 Videos
WAVES AND OSCILLATIONS
ALLEN|Exercise Part-1(Exercise-02)|19 Videos
WAVES AND OSCILLATIONS
ALLEN|Exercise Part-2(Example)|15 Videos
SEMICONDUCTORS
ALLEN|Exercise Part-3(Exercise-4)|51 Videos

Similar Questions

Explore conceptually related problems

A Zener diode is specified having a breakdown voltage of 9.1 V with a maximum power dissipation of 364 mW. What is the maximum current that the diode can handle.

A zener diode having breakdown voltage equal to 15V, is used in a voltage regulator circuit shown in figure. Find the current through the diode.

The diode used in the circuit shown in the figure has a constant voltage drop of 1 V at all current and a maximum power rating of 100 mW . What should be the value of the resistor R, connected in series with the diode for obtaining maximum current put less l?

An experiment is preformed to determine the I-V characteristics of a Zener diode, which has a protective resistance of R = 100 Omega , and maximum power of dissipation rating of 1 W. The minimum voltage range of the DC source in the circuit is :-

The diode used at a constant potential drop of 0.5 V at all currents and maximum power rating of 100 mW. What resistance must be connected in series diode, so that current in circuit is maximum?

If current in diode is five times that in R_(1). Breakdown voltage of diode is 6 volt. Find R= ?

A Zener diode with a breakdown voltage of 4 V is connceted in sereis with a resistance R to a battery of emf 10 V. The maximum power dissipation rating for the Zener diode is 1 W. The value of R to ensure maximum power dissipation across the diode is

In the figure, the reverse breakdown voltage of a Zener diode is 5.6V, then the current I_(Z) through the diode is

In the circuit shown in fig. 7.24 , all the resistors are rated at a maximum power of 1.00 W . What is the maximum emf epsilon that the battery can have without burning up any of the resistors?

Three 2 Omega resistors, A, B and C are connected as shown in figure. Each of them dissipates energy and can with stand a maximum power of 18 W without melting. Find the maximum current that can flow through the three resistors ?

ALLEN-WAVES AND OSCILLATIONS-Part-3(Example)

Differentiate zener and avalance breakdown.
Text Solution
|
A sinusoidal voltage of amplitude 25 volts and frequency 50 Hz is appl...
Text Solution
|
The halfwave rectifier supplies power to be 1 k Omega. The input suppl...
Text Solution
|
The halfwave rectifier supplies power to be 1 k Omega. The input suppl...
Text Solution
|
A fullwave P.N diode rectifier used load resistor of 1500 Omega. No fi...
Text Solution
|
A zener diode of voltage V(Z)(=6 volt) is used to maintain a constant ...
Text Solution
|
A Zener diode is specified as having a breakdown voltage of 9.1 V,with...
Text Solution
|
In a transistor, the value of beta is 50. Calculate the value of alpha
Text Solution
|
Calculate the collector and emitter current for which I(b) = 20 mA, be...
Text Solution
|
For a common-emitter transistor amplifier, the current gain is 60. If ...
Text Solution
|
Transistor with beta = 75 is connected to common-base configuration. W...
Text Solution
|
The base current is 100 muA and collector current is 3 mA (a) Calcul...
Text Solution
|
In npn transistor circuit, the collector current us 10 mA. If 95 % of ...
Text Solution
|
In an n-p-n transistor 10^10 electron enter the emitter in 10^(-6) s. ...
Text Solution
|
TV transmission tower at Kota has a height of 80 m. Radius of earth is...
Text Solution
|
A ground reciver is receiving a signal at (a) 5 MHz, and (b) 100 MHz, ...
Text Solution
|
A separate high freq. wave (i.e. carrier wave) is needed in modulation...
Text Solution
|
A message signal of frequency 10 KHz and peak voltage of 10V is u sed ...
Text Solution
|
The modulation index of an FM carrier having a carrier swing of 200kHz...
Text Solution
|
A 100 MHz xarrier wave frequency is modulated by 10 kHz sinusoidal mod...
Text Solution
|