Home
Class 12
PHYSICS
Practical diagram for meter bridge is as...

Practical diagram for meter bridge is as shown in figure.
(a) G deflects zero, when `l_(1)=20cm` and `R=100Omega` then find X.
(b) If R and X are interchanged then find `l_(1)` for zero deflection.

Text Solution

Verified by Experts

(a) `l_(1)=20cm, l_(2)=100-l_(1)=100-20=80cm,R=100Omega`
`(P)/(Q)=(R)/(S)rArr(l_(1))/(l_(2))=(R)/(X)rArr(20)/(80)=(100)/(X)rArrX=400Omega`
(b) `(l_(1))/(100-l_(1))=(X)/(R)=(400)/(100)rArrl_(1)=80cm` or R and X interchane then `l_(1),l_(2)` interchanged.
Promotional Banner

Similar Questions

Explore conceptually related problems

A meter bridge setup is shown in the figure. If there is null deflection in galvanometer when length AC = 20 cm, then the value of resistance R is

In a meter bridge circuit as shown in the figure, the bridge is balanced when AJ = 20 cm. On interchanging P and Q the balance length shifts by

For the potentiometer arrangement shown in the figure, length of wire AB is 100 cm and its resistance is 9 Omega . Find the length AC for which the galvanometer G will show zero deflection.

The Wheatstone's bridge shown in the Fig. A2.5 is balanced. If the positions of the cell C and the galvanometer F are now interchanged, G will show zero deflection

In the circuit shown in fig. X_(C ) = 100 Omega,(X_L)=200 Omega and R=100 Omega . The effective current through the source is

In the curcuit shown in figure R_1=R_2=R_3=10Omega . Find the currents through R_1 and R_2

The resistances P,Q,R and S in the bridge shown are adjusted such that the deflection in the galvanometer G is zero when both the keys K_(1) and K_(2) are inserted. The galvanometer will show a momentary deflection if

The metre bridge wire AB shown in the adjoining figure is 100 cm long when AD = 30 cm, no deflection occurs in the galvanometer. The value of R is

In the circuits shown in the figures, the galvanometers show no deflection. Find the ratio of R_(1) and R_(2) .

The potentiometer wire AB shown in figure is 50cm long.When AD=30cm, no deflection occurs in the galvanmeter.Find R.