Home
Class 11
PHYSICS
A light cylindrical vessel is kept on a ...

A light cylindrical vessel is kept on a horizontal surface it's base area is `A`. A hole of cross-sectional area `a` is made just at it's bottom side. The minimum coefficient of friction necessary for not sliding of vessel due to the impact force of the emerging liquid.

A

varying

B

`a//A`

C

`2a//A`

D

None of these

Text Solution

AI Generated Solution

To solve the problem, we need to find the minimum coefficient of friction necessary to prevent the cylindrical vessel from sliding due to the impact force of the liquid emerging from the hole at the bottom. ### Step-by-Step Solution: 1. **Identify the Variables**: - Let the base area of the vessel be \( A \). - Let the cross-sectional area of the hole be \( a \). - Let the height of the liquid in the vessel be \( h \). ...
Promotional Banner

Topper's Solved these Questions

Similar Questions

Explore conceptually related problems

A rod of length L kept on a smooth horizontal surface is pulled along its length by a force F. The area of cross-section is A and Young's modulus is Y. The extension in the rod is

A cylindrical vessel of area of cross section A is filled with a liquid up to a height H . A very small hole of area of cross section a is made at the bottom of the vellel. Find the time taken by the vessel to become empty.

In the figure shown, a light container is kept on a horizontal rough surface of coefficient of friction mu=(Sh)/V . A very small hole of area S is made at depth 'h'. Water of volume 'V' is filled in the container. The friction is not sufficient to keep the container at rest. The acceleration of the container initially is

A cubical box of side L rests on a rough horizontal surface with coefficient of friction p. A horizontal force F is a applied on the block as shown in Fig. 15.4.6. If the coefficient of friction is sufficiently high so that the block does not slide before toppling, the minimum force required to topple the block is

A cylindrical vessel open at the top is 20cm high and 10 cm in diameter. A circular hole of cross-sectional area 1cm^(2) is cut at the centre of the bottom of the vessel. Water flows from a tube above it into the vessel at the rate of 10^(2)cm^(3)//s . The height of water in the vessel under steady state is (Take g=10m//s^(2)) .

A liquid of density rho is filled in a vessel up to height H and a hole of cross section area A is made at a depth h below the free surface of liquid. The speed of liquid coming out of the hole is independent of

A cylindrical vessel filled with water up to a height of 2m stands on a horizontal plane. The side wall of the vessel is a plugged circular hole touching the bottom. Find the minimum diameter of the hole so that the vessel begins to move on the floor if the plug is removed. The coefficient of friction between the bottom of the vessel and the plane is 0.4 and the total mass of water plus vessel is "100 kg" .

A cylindrical vessel of area of cross-section A is filled with water to a height H. It has capillary tube of length l and radius r fitted horizontally at its bottom. If the coeffiecient of viscosity of water is eta , then time required in which level will fall to a height (H)/(2) is (density of water is rho )

A cubical block of mass M and side a is placed on a rough horizontal plane as shown in the figure A force F is acting on the block at height 3a/4 from the bottom. The minimum value of coefficient of friction (mu) such that block lopples without sliding will be

A cylinderical tank having cross sectional area ^^=0.5m^(2) is filled liquids of densities rho_(1)=900kgm^(3)&rho_(2)=600kgm^(3) to a height h=60cm as shown in the figure a small hole having area a=5cm^(2) is made in right vertical wall at a height y=20cm from the bottom calculate. (i). velocity of efflux (ii). horizontal force F to keep the cylinder in static equilibrium if it is placed on a smooth horizontal plane (iii). minimum and maximum value of F to keep the cylinder at rest. The coefficient of friction between cylinder and the plane is mu=0.1 (iv). velocity of the top most layer of the liquid column and also the velocity of the boundary separating the two liquids.