Home
Class 12
PHYSICS
A tuning fork vibrating at frequency 800...

A tuning fork vibrating at frequency 800 Hz produces resonance in a resonance column tube. The upper end is open and the lower end is closed bythe water surface which can be varied. Successive resonances are observed at lengths 9.75 cm, 31.25 cm and 52.75 cm. Calculate the speed of sound in air from these data.

Text Solution

AI Generated Solution

To calculate the speed of sound in air using the given data from the resonance column tube, we can follow these steps: ### Step 1: Identify the lengths of the resonances The lengths at which successive resonances occur are given as: - \( L_1 = 9.75 \, \text{cm} \) - \( L_2 = 31.25 \, \text{cm} \) - \( L_3 = 52.75 \, \text{cm} \) ...
Promotional Banner

Similar Questions

Explore conceptually related problems

A tuning fork of frequency 500 H_(Z) is sounded on a resonance tube . The first and second resonances are obtained at 17 cm and 52 cm . The velocity of sound is

In a resonance tube, using a tuning fork of frequency 325 Hz, two successive resonance lengths are observed at 25.4 m and 77.4 cm respectively. The velocity of sound is air is

A tuning fork is used to produce resonance in glass tuve. The length of the air column in the tube can be adjusted by a variable piston. At room temperature of 27^@C two succesive resonance are produced at 20 cm and 73 cm column length. If the frequency of the tuning fork is 320 Hz. the velocity of sound is air at 27^(@)C is

A tuning fork of 512 Hz is used to produce resonance in a resonance tube experiment . The level of water at first resonance is 30. 7 cm and at second resonance is 63 . 2 cm . The error in calculating velocity of sound is (speed of sound in air = 330 m/s)

If a tuning fork of frequency ( f_(0) ) 340 Hz and tolerance pm1% is used in the resonance column method for determining the speed of sound. If the first and the second resonance are measured at l_(1) = 24.0 cm and l_(2) = 74.70 cm , then the permissible error in speed of sound is

A tuning fork produces resonance at length 27 cm of a pipe closed at one end. Calculate the length of the pipe open at both ends which will produce resonance with the same tuning fork.

A tuning fork of frequency n is held near the open end of tube, the tube is adjusted until resonance occurs. If the two shortest lengths to produce resonance are L_1 and L_2 , then the speed of the sound is

In a resonance column experiment, a tuning fork of frequency 400 Hz is used. The first resonance is observed when the air column has a length of 20.0 cm and the second resonance is observed when the air column has a length of 62.0 cm. (a) Find the speed of sound in air.(b) How much distance above the open end does the pressure node form ?

An open pipe resonates with a tuning fork of frequency 500 Hz . It is observed that two successive notes are formed at distance 16 and 46 cm from the open end. The speed of sound in air in the pipe is

A tuning fork of frequency 440 Hz resonates with a tube closed at one end of length 18 cm and diameter 5 cm in fundamental mode. The velocity of sound in air is