Home
Class 12
PHYSICS
An LC- circuit (inductance 0.01 H and ca...

An LC- circuit (inductance 0.01 H and capacitance `1 muF`) is connected to a variable a.c. source as shown in fig. 14.8. Draw rough sketch of the current -variation as the frequency is changed from 1 kHz to 2 kHz.

Text Solution

Verified by Experts

We have,`|Z|=Z=sqrt(R^(2)+((1)/(omegaC-(1)/omegaL))^(2))`[refer to the solution of Fig. (b) in Question 11]At resonance, `omegaC =(1)/(LC) impliesZto infty`, and the current amplitude is `l_(o) =(V_(0)/(Z)=0`
Now,`f_(r)=(omega_(r))/(2pi)=(1)/(2pisqrt(LC))=(1)/(2pisqrt(0.01xx1xx10^(-6)))=1.592kHz`
So, for the given circuit`|Z|=(1)/(omegaC-(1)/(omegaL))=(1)/((2PIFC-(1)/(2pifL))`
Promotional Banner

Similar Questions

Explore conceptually related problems

An LC circuit (L = 0.01H, C = 1muF) is connected to an AC source of variable frequency. If the frequency is varied from 1 kHz, then show the consequent variation of impedance by a rough sketch.

A coil of inductance 0.2 H and 1.0 ohm resistance is connected to a 90 V source. At what rate will the current in the coil grow at the instant the coil is connected to the source?

If resistance R = 10 Omega , inductance L = 2 mH and capacitance C = 5 muF are connected in series to an AC source of frequency 50 Hz, then at resonance the impedance of circuit is

Consider a series L-R circuit in which L=(1)/(pi)H and resistance R = 100 Omega . When the circuit is connected to a.c. source 220 V, 50 H. Find the current drawn from the source.

An AC circuit consists of an inductor of inductance 0.5H and a capacitor of capacitance 8muF in series. The current in the circuit is maximum when the angular frequency of AC source is

A capacitor of capacitance 2 mu F is connected in the tank circuit of an oscillator oscillating with a frequency of 1 kHz. If the current flowing in the circuit is 2 mA , the voltage across the capacitor will be

An inductance of 2.0 H , a capacitance of 18 muF and a resistance of 10 kOmega are connected to an AC source of 20 V with adjustable frequency. (a) What frequency should be chosen to maximise the current in the circuit? (b) What is the value of this maximum current?

A series LCR circuit with L = 4.0 H, C = 100 mu F and R = 60 Omega is connected to a variable frequency 240 V source. Calculate (i) angular frequency of the source which drives the circuit in resonance, (ii) current at the resonating frequency, (iii) rms potential drop across the inductance at resonance.

A coil of resistance 300 Omega and inductance 1.0 henry is connected across an voltages source of frequency 300//2pi Hz . The phase difference between the voltage and current in the circuit is

A series LCR circuit with R = 20 Omega, L = 1.5 H and C = 35 mu F is connected to a variable frequency 200 V ac supply. When the frequency of the supply equals the natural frequency of the circuit, what is the average power in kW transferred to the circuit in one complete cycle?